Knowledge base2026-11-15T18:56:00+01:00

Choose a product group

Metal roofing

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Knowledge base

Izoprofil.com helps you compare materials for a specific building project. The guides cover the uses of sandwich panels, PIR insulation boards, metal roof tiles and trapezoidal sheets. The criteria depend on the application, including the supporting structure, thermal performance and requirements for the finished surface. Read the product specifications, identify which dimensions affect the order and compare complete solutions. The articles help you discuss the options with a designer or installer and check the suitability of the selected materials before purchase.

Choosing fixings for mineral wool wall panels

The fastener transfers the load from the panel to the support and helps maintain the tightness of the cladding. Its selection is not limited to a length matching the mineral wool thickness. In a new wall, the wind design, the properties of the substrate and the details of the specific panel must be combined. Only from this does the type and number of fixings follow. Wind acts on the cladding, and the panel transfers its effect through the fixings to the purlins or columns. In this chain, each element has its own limit. This may be the screw-to-support connection, the washer pulling through the sheet, or the retention of the concealed edge of the panel.

Is it worth buying a battery storage system together with a photovoltaic roof?

Buying them together can make it easier to select the equipment and prepare the installation, but it is not always the best financial decision. The storage system must be matched to the surplus and to later consumption. In a new house these figures are often still uncertain. You can therefore consider buying it straight away or consciously preparing for later expansion. It is important that both options have a defined scope rather than relying on a general promise of future compatibility. If you know the building's needs and the expected mode of operation, it is easier to select the whole package in one go. You can plan the space for the equipment, the cable routes, the metering and any backup circuits. This avoids some of the later modifications.

What do purlins do and how are they sized for the roof?

Roof purlins are beams that support further roof elements or the roof covering directly, selected together with span, loads, bracing and covering fixings. Before choosing, check whether the given profile or panel has the required support and whether the purlin spacing matches the tables for that specific product. The shape of a steel section alone does not determine its load capacity or permissible spacing. In a timber roof structure, a purlin may support rafters along their length and bears on columns, while in a hall it often runs between main frames. Design decisions are left to the designer.

Choosing a metal roof for a modern commercial building

Choosing a metal roof for a modern company building depends primarily on how the interior will be used, not on the appearance of the covering alone. An open shelter needs a different approach from a heated warehouse, and a heated warehouse needs a different approach from an office. It is therefore worth checking the temperature and humidity inside and the type of business activity, because the roof must suit conditions on both sides of the building envelope. Define acoustic and fire requirements straight away, together with any equipment planned for the roof, such as ventilation units or photovoltaic installations. A project covering these elements from the outset makes installation easier and allows sensible placement of penetrations, skylights and service routes.

How to size and select gutters for a metal roof

Gutters are selected primarily according to the volume of water to be drained and the roof layout, not merely the colour of the sheeting. It is worth checking the effective roof area, pitch, eaves length and downpipe positions, since a large slope directing water to one point makes different demands than several short sections. The gutter and pipe cross-section should be confirmed against the specific system's data, allowing for corners, valleys and thermal movement. Colour matching alone does not guarantee efficient drainage.

Choosing a covering for a roof with multiple slopes

The choice of covering for a multi-pitched roof depends above all on the cutting layout and the number of details, not on the price per square metre alone. Such a roof has more slopes, valleys and ridges than a simple gable arrangement, so it is worth checking how the material performs on short runs and bends and how many flashings will be needed. Modular metal tiles can make the work easier, but they do not eliminate waste. When assessing the design, count the lengths of valleys, ridges and eaves rather than only the covering area.

Back to top