Knowledge base
Izoprofil.com helps you compare materials for a specific building project. The guides cover the uses of sandwich panels, PIR insulation boards, metal roof tiles and trapezoidal sheets. The criteria depend on the application, including the supporting structure, thermal performance and requirements for the finished surface. Read the product specifications, identify which dimensions affect the order and compare complete solutions. The articles help you discuss the options with a designer or installer and check the suitability of the selected materials before purchase.
Small or large corrugated sheets: how panel divisions affect a building’s appearance
The sheet format affects the appearance of the roof slope, the number of joints and how installation is organised. Fibre cement sheets are best compared in relation to a specific building form. Asbestos-free fibre cement in shorter sheets can produce a finer division, while a large format can emphasise the continuity of the roof. Neither of these effects exempts you from structural requirements. On a small gazebo a large sheet may occupy a considerable part of the visible roof slope. On a vast hall the same format will be just one of many repetitive elements. It is worth assessing how often horizontal laps are to appear. Their rhythm influences the perception of the roof's proportions. There is, however, no rule that a small building always needs a small sheet.
Autumn roof checks before the first frost and snowfall
In autumn, first check whether water can drain freely from the roof slope and gutters, because a blockage or choked outlet may only become apparent with the first rainfall. Walk around the building and assess the covering, flashings and signs of damp on the façade below the gutter. Also look in the attic after rain to distinguish fresh moisture from old stains. On that basis, plan repairs before the frost, matched to the type of coating and the conditions recommended by the manufacturer.
Five roofing mistakes to look for at handover
The key is to check the entire roof system, not just the appearance of the finished surface. Before acceptance, verify the material selection, the layers beneath the covering, the fixings and the flashings before they are concealed. For T18 and T35 sheet and metal roofing tiles, assess how the coating is handled and whether the covering matches the pitch, supports and loads. The profile designation alone does not determine load capacity – the geometry, steel thickness and support scheme matter. Acceptance should cover detail documentation, leaving design decisions to the designer.
Choosing sandwich panels for new cattle, pig and poultry housing
A livestock building requires an enclosure matched to temperature, moisture and the way the animals are kept. The same panel does not have to perform in every room of the farm. In a new cattle shed, pig house or poultry house, the choice of walls and roof should be made together with the ventilation design, washing zones and the layout of equipment. The designer needs information on the purpose of individual rooms, the expected temperature and the amount of moisture. Part of the building may operate with different heating or a different airflow than the adjacent zone. One insulation variant should not be adopted solely on the basis of the name of the entire facility.
When is a roof panel suitable above an extension of an older building?
The new part of an older building has its own structure, roof geometry and thermal conditions, but must work together with the existing building. A sandwich panel can help to quickly close the extension. However, success depends above all on the connection between the two parts: the way loads are transferred, water drainage and the continuity of the thermal envelope. Before selecting the panel, check whether the extension has its own supports or uses the existing wall or structure. An assessment of the condition of these elements and calculations for the new arrangement are needed. A visibly solid wall is not proof that it can take additional reactions, especially near former openings and rebuilt sections.
Where does a mineral wool wall help meet the requirements of a new building?
Wall panels with mineral wool can be considered for industrial halls, workshops and buildings accessible to users, but their suitability is determined by the design of the partition. Fire, noise and the connection of the wall to the structure are particularly important. In a new building, these matters are easier to coordinate if the function of each partition is established before the cladding is selected. An enclosing wall closes the building against the weather. A wall with a specified fire resistance performs an additional task that must be demonstrated for the complete solution. Sometimes both tasks fall to the same partition, but this should not be assumed without checking the documentation.





