About PiVi

This author has not yet filled in any details.
So far PiVi has created 1504 blog entries.

Metal shingle roofing or tile-effect sheets: how do they differ?

Shingle-effect metal roofing uses profiled steel to reproduce the pattern of overlapping timber shingles. It is available with a coated or stone-coated finish. To choose a system, check the data sheet and fitting instructions for the particular profile. The name alone tells you little about steel thickness, effective cover width or how the joints keep out rain. Check the permitted pitch, batten spacing and support at the eaves, and leave room for flashings around roof windows and chimneys. Compare those details alongside the appearance when choosing between shingle-effect and tile-effect sheets.

By |2026-11-15T00:02:07+01:002022-11-13|Knowledge base|Comments Off on Metal shingle roofing or tile-effect sheets: how do they differ?

Specification for fence picket production: what to check in the latest version?

The quote, sample and measurement lead to a single document according to which the material will be prepared. This is the moment to check that all arrangements are consistent. Metal fence pickets made exactly to the wrong table will still not fit the project. The final specification should be readable by someone who did not take part in the earlier discussions. Every important feature must follow from the written record. The document should be dated and clearly identified. If dimensions were changed earlier, the old list must be clearly replaced by the current one. Do not leave the supplier with several files marked “please take the latest comments into account”. The final version should contain those comments in the body of the text.

By |2026-11-15T18:59:27+01:002022-11-12|Knowledge base|Comments Off on Specification for fence picket production: what to check in the latest version?

Common causes of roof window faults and complaints

Roof window problems often arise from product choice, installation or the conditions inside the attic. Water on the pane does not always signal a leak, and condensation need not mean a faulty seal. Check the flashing, the junction with the metal sheet, the insulation and the ventilation. A careful order and installation records cut the risk of mistakes and help identify what caused the fault. The window must suit the roof pitch, how the interior is used and the intended fitting; its size and position within the structure also count. A larger window may call for changes to the roof truss, and rafters should not be cut without a design for transferring loads. For thermal assessment, the whole-window value is distinct from that of the glass alone.

By |2026-11-14T20:37:04+01:002022-11-06|Knowledge base|Comments Off on Common causes of roof window faults and complaints

Snow fences or individual snow guards? Choosing protection above entrances and along the eaves

First establish which areas beneath the roof are most exposed to sliding snow, and only then choose between snow fences and point snow guards. Check the roof pitch, local snow loads and how forces are transferred to the structure — matching an accessory's colour to the sheet metal is not enough on its own. Snow fences form a continuous barrier, whereas point elements work in a specific layout, so their function and spacing need separate assessment. Bear in mind that protection does not remove the need to monitor snow quantity and roof condition.

By |2026-11-15T03:57:57+01:002022-11-01|Knowledge base|Comments Off on Snow fences or individual snow guards? Choosing protection above entrances and along the eaves

Comparing sandwich panel offers across Poland

The most favourable panel offer does not always have the lowest price per square metre. When comparing suppliers from different parts of Poland, lengths, cutting patterns, accessories and transport conditions matter. It is worth calculating the cost of the material that will actually go into the building envelope and separating it from the value of the purchased pack alone. One offer may quote a price per square metre of covering, another per piece, and a third per whole pack. Bring them all down to the number of panels with known dimensions and usable area. Do not automatically compare a roof panel with a flat wall panel of the same thickness. Their geometry and role in the building are different.

By |2026-11-14T12:52:25+01:002022-10-31|Knowledge base|Comments Off on Comparing sandwich panel offers across Poland

How to compare offers for PIR boards without hidden gaps in the bill of quantities

Two offers for PIR boards can have the same thickness and a completely different scope. A reliable comparison should cover the parameters, the facing, the accessories and the installation. It is also worth checking the coverage area, transport and preparation costs. Only then does the price become useful information. PIR boards can look similar yet have different facings, strength and intended use. Before purchase, a current technical data sheet, a declaration of performance and installation instructions are needed. The product variant should be described without abbreviations that cause confusion. In the enquiry, it is worth stating the full board specification and the conditions in which it will work.

By |2026-11-16T02:21:10+01:002022-10-29|Knowledge base|Comments Off on How to compare offers for PIR boards without hidden gaps in the bill of quantities

When do outlet mineral wool wall panels save money on a new build?

A second-grade mineral wool panel may suit a new build if its limitations are known before the elevation is drawn. The saving depends on the area that can actually be installed. Joints, claddings and documents must also be checked, because a visual defect and a loss of tightness have entirely different consequences. In a new hall, the outlet is best assessed against a specific wall drawing. Mark the gates, windows, corners and plinth height. Only then compare the lengths of the available panels with the sections between supports. A short panel may fill the strip above a window well while being unsuitable for the entire adjacent field.

By |2026-11-14T10:37:13+01:002022-10-27|Knowledge base|Comments Off on When do outlet mineral wool wall panels save money on a new build?

BauderPIR M/MF as an alternative: what to compare in quotations

BauderPIR M and MF should be compared with other boards as part of an agreed roof build-up. The mineral facing, the edge geometry and the lambda value for the ordered thickness all influence the choice of covering and the scope of works. It is not enough to swap the product name in a bill of quantities written for an aluminium-faced board: the required thermal resistance, the layer heights and the compatibility of the waterproofing must all be checked. Include the M or MF designation, the thickness, the roof plan and the method of fixing the covering with your enquiry. Below we show how to separate the cost of the insulation from the cost of the connections to the membrane or roofing felt, and which documents to gather in order to assess the real saving offered by the proposed variant.

By |2026-11-16T02:22:22+01:002022-10-27|Knowledge base|Comments Off on BauderPIR M/MF as an alternative: what to compare in quotations

Choosing standing seam roof panels: what to check before ordering

First establish whether the covering you are considering is a snap-lock panel or a seam formed on site – these are two different solutions. The panel edges are factory-shaped to click together, while a traditional seam is created by folding the metal on the roof. So do not transfer requirements for pitch, substrate or joining between them. Before buying, check the minimum pitch, support, fixing and thermal movement conditions. Also consider the eaves, ridge and penetrations. Compare the whole roof with T18 or T35 sheet.

By |2026-11-14T23:57:18+01:002022-10-19|Knowledge base|Comments Off on Choosing standing seam roof panels: what to check before ordering

Buying termPIR WS: roof covering, fixings and cutting waste

A quotation for termPIR WS should refer to the selected roof build-up. The price of the insulation does not automatically include fixings, separating layers and flashings. A comparison only becomes meaningful once the same technical assumptions have been established with all suppliers. termPIR WS consists of a PIR core with a gas-permeable glass fleece facing on both sides. This is a different surface from a gas-tight aluminium laminate. An enquiry for PIR boards should describe the flat roof area on which the board facing is to work together with the covering. The termPIR WS fleece must be linked to the layers and the fixing method of the chosen roof covering.

By |2026-11-16T02:21:23+01:002022-10-16|Knowledge base|Comments Off on Buying termPIR WS: roof covering, fixings and cutting waste
Back to top