About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

Choosing fixings for mineral wool wall panels

The fastener transfers the load from the panel to the support and helps maintain the tightness of the cladding. Its selection is not limited to a length matching the mineral wool thickness. In a new wall, the wind design, the properties of the substrate and the details of the specific panel must be combined. Only from this does the type and number of fixings follow. Wind acts on the cladding, and the panel transfers its effect through the fixings to the purlins or columns. In this chain, each element has its own limit. This may be the screw-to-support connection, the washer pulling through the sheet, or the retention of the concealed edge of the panel.

By |2026-11-14T10:37:35+01:002025-02-03|Knowledge base|Comments Off on Choosing fixings for mineral wool wall panels

Is it worth buying a battery storage system together with a photovoltaic roof?

Buying them together can make it easier to select the equipment and prepare the installation, but it is not always the best financial decision. The storage system must be matched to the surplus and to later consumption. In a new house these figures are often still uncertain. You can therefore consider buying it straight away or consciously preparing for later expansion. It is important that both options have a defined scope rather than relying on a general promise of future compatibility. If you know the building's needs and the expected mode of operation, it is easier to select the whole package in one go. You can plan the space for the equipment, the cable routes, the metering and any backup circuits. This avoids some of the later modifications.

By |2026-11-15T19:00:14+01:002025-02-01|Knowledge base|Comments Off on Is it worth buying a battery storage system together with a photovoltaic roof?

What do purlins do and how are they sized for the roof?

Roof purlins are beams that support further roof elements or the roof covering directly, selected together with span, loads, bracing and covering fixings. Before choosing, check whether the given profile or panel has the required support and whether the purlin spacing matches the tables for that specific product. The shape of a steel section alone does not determine its load capacity or permissible spacing. In a timber roof structure, a purlin may support rafters along their length and bears on columns, while in a hall it often runs between main frames. Design decisions are left to the designer.

By |2026-11-14T23:57:03+01:002025-01-26|Knowledge base|Comments Off on What do purlins do and how are they sized for the roof?

Choosing a metal roof for a modern commercial building

Choosing a metal roof for a modern company building depends primarily on how the interior will be used, not on the appearance of the covering alone. An open shelter needs a different approach from a heated warehouse, and a heated warehouse needs a different approach from an office. It is therefore worth checking the temperature and humidity inside and the type of business activity, because the roof must suit conditions on both sides of the building envelope. Define acoustic and fire requirements straight away, together with any equipment planned for the roof, such as ventilation units or photovoltaic installations. A project covering these elements from the outset makes installation easier and allows sensible placement of penetrations, skylights and service routes.

By |2026-11-14T20:11:55+01:002025-01-19|Knowledge base|Comments Off on Choosing a metal roof for a modern commercial building

How to size and select gutters for a metal roof

Gutters are selected primarily according to the volume of water to be drained and the roof layout, not merely the colour of the sheeting. It is worth checking the effective roof area, pitch, eaves length and downpipe positions, since a large slope directing water to one point makes different demands than several short sections. The gutter and pipe cross-section should be confirmed against the specific system's data, allowing for corners, valleys and thermal movement. Colour matching alone does not guarantee efficient drainage.

By |2026-11-14T16:52:16+01:002025-01-15|Knowledge base|Comments Off on How to size and select gutters for a metal roof

Choosing a covering for a roof with multiple slopes

The choice of covering for a multi-pitched roof depends above all on the cutting layout and the number of details, not on the price per square metre alone. Such a roof has more slopes, valleys and ridges than a simple gable arrangement, so it is worth checking how the material performs on short runs and bends and how many flashings will be needed. Modular metal tiles can make the work easier, but they do not eliminate waste. When assessing the design, count the lengths of valleys, ridges and eaves rather than only the covering area.

By |2026-11-14T16:52:14+01:002025-01-12|Knowledge base|Comments Off on Choosing a covering for a roof with multiple slopes

Choosing a roof covering for a holiday cottage

The choice of roofing for a holiday home depends primarily on the intended use and the roof parameters. It is worth checking whether the building will be used only in summer or also in winter, as well as the roof pitch and support spacing. The risk of condensation, rain noise and the convenience of transporting sheets to the plot should be assessed. If heating is planned, the entire insulation system must be designed, not just the top layer. Location affects loads and maintenance. The covering alone will not ensure comfort without properly selected flashings, ventilation and fixings.

By |2026-11-14T20:14:23+01:002025-01-08|Knowledge base|Comments Off on Choosing a roof covering for a holiday cottage

How rafter sizes are specified and what affects their price

Rafter dimensions are determined by calculation, not by the building width alone. The span between supports, spacing of adjacent rafters, timber grade, loads and connection type all matter. Lightweight metal sheeting reduces the roof's self-weight, yet snow and wind still act on the structure. Price depends on volume, length and timber preparation. The order should match the design and the actual roof layout. A rafter works over the section between supports, carrying loads from the roof area assigned to it. The length of that section matters, not just the total beam length. An additional purlin can alter the structural behaviour, as can the spacing of neighbouring rafters.

By |2026-11-14T23:56:30+01:002025-01-02|Knowledge base|Comments Off on How rafter sizes are specified and what affects their price

What determines rafter size and spacing?

The cross-section and spacing of rafters are determined by calculation of the whole roof structure, not by one universal size. Check above all the span between supports, the anticipated loads, the timber class and the connections. Also consider deflection, not just strength, because excessive deformation affects the roof plane geometry and tightness. Insulation thickness should not be the sole reason for choosing the member height. A table of common sizes helps in understanding the design but does not replace calculations for a specific case.

By |2026-11-14T16:50:25+01:002024-12-29|Knowledge base|Comments Off on What determines rafter size and spacing?

How can you fairly compare the price of a photovoltaic roof with separate roofing and panels?

An integrated roof must be compared with a complete package of conventional roofing and photovoltaics. Comparing its price with the panels alone leads to a misleading conclusion because it omits the building function. It is equally misleading to assume that integration always results in a lower cost. Two cost estimates with the same scope are needed, for the same roof slope and comparable energy performance. Only then can the investor see what they are paying for. Both variants should result in a finished, weathertight roof and a working installation with the described parameters. Include the roofing, flashings, required layers, installation and the electrical part. In the solution with separate modules, their mounting structure and fixing method are additional.

By |2026-11-15T18:59:28+01:002024-12-14|Knowledge base|Comments Off on How can you fairly compare the price of a photovoltaic roof with separate roofing and panels?
Back to top