About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

Planning the supports for a mineral wool sandwich panel wall

An insulated panel with a mineral wool core is a building envelope element that requires designed supports. Their arrangement is determined by loads, installation direction, openings and the properties of the specific panel. In a new hall, it is worth resolving these issues before ordering the frame. Adding rails later may conflict with windows, services and the façade line. Columns and rails transfer actions to further building elements. The insulated panel acts between supports within the range specified for the product; it should not automatically be treated as bracing for the entire hall. If the structural engineer wishes to utilise a specific interaction between the envelope and the frame, this must be justified in the design.

By |2026-11-14T10:37:37+01:002025-08-09|Knowledge base|Comments Off on Planning the supports for a mineral wool sandwich panel wall

Metal fence pickets for a house: choosing the infill and layout

Metal pickets will work when you want a durable fence with a repeatable colour and no frequent painting, but the choice should follow the function of the property. Before buying, set priorities for each side of the plot: privacy, screening from the street or marking the boundary. Check whether openwork bays give enough visual exposure and whether a dense layout increases the area exposed to wind. View a sample from the side to assess the section and coating, and count the complete set with posts, rails and gate.

By |2026-11-14T23:58:02+01:002025-08-04|Knowledge base|Comments Off on Metal fence pickets for a house: choosing the infill and layout

Is a sheet metal fence right for your property?

A sheet-metal fence will work on a property only once the solution is matched to the specific location and the desired effect. Before buying, it is worth checking whether a full trapezoidal sheet or profiled pickets better meet the needs, because this term covers various solutions. The gaps should be assessed from different angles, along with the finish on both sides of the fence. The gate structure and automation are worth settling before choosing decorative details, leaving design decisions to the designer.

By |2026-11-14T20:15:05+01:002025-08-01|Knowledge base|Comments Off on Is a sheet metal fence right for your property?

Choosing the thickness of roof panels and detailing the junctions

Roof panel thickness affects insulation performance, the dimensions of details and how the panel behaves between supports. It should not be determined separately from the structure. In new construction, the best moment to choose is before the wall heights are closed and service penetrations are planned. Then complete, feasible roof variants can be compared. Start with the temperature maintained in the building, the heating method and the nature of use. A cold canopy, a warehouse and a workshop with a controlled microclimate have different needs. Humid processes additionally require assessment of surface temperatures and joint tightness. The roof area alone does not determine the correct thickness.

By |2026-11-14T16:49:15+01:002025-07-24|Knowledge base|Comments Off on Choosing the thickness of roof panels and detailing the junctions

Why parts availability matters when choosing a photovoltaic roof

A roof is chosen with long-term use in mind, and some devices and components may need to be replaced over time. That is why, before buying, you should ask about how parts are identified, the service procedure and possible replacements. In an integrated system, compatibility concerns both the electrics and the roof covering. Merely ensuring that a product is popular does not explain how a specific section of the roof will be repaired in a few years' time. The active element must fit the geometry and joints of the adjacent covering. At the same time, it should work with the existing electrical system. Similar dimensions and colour are not enough. A change in voltage, profile or method of fixing may require different measures than a simple replacement of one unit.

By |2026-11-15T19:00:26+01:002025-07-17|Knowledge base|Comments Off on Why parts availability matters when choosing a photovoltaic roof

What determines the weight of T18 and T35 trapezoidal sheets?

The weight of T18 and T35 trapezoidal sheets depends primarily on the steel thickness and on which surface area the stated mass refers to. There is no single fixed value for these profiles, because the same shape can be available in different material variants. When planning transport and performing structural calculations, check whether the data relate to the total area, the coverage area or a single sheet. It is also worth establishing whether protective coatings are included. Only the technical data sheet for the specific product provides a reliable mass.

By |2026-11-14T20:14:06+01:002025-07-17|Knowledge base|Comments Off on What determines the weight of T18 and T35 trapezoidal sheets?

How to write an enquiry for metal fence pickets to get a complete quote

A message like "please quote for fence pickets" usually only gives a starting point. A reliable quote requires details about the product and the planned fence. You don't need to know every technical detail. However, it is worth clearly describing what has already been decided and highlighting questions where you need help. This makes offers for sheet metal pickets easier to compare and ensures the order is not based on assumptions. State whether you need just the infill, complete bays or a fence with installation. These are three different scopes. Also specify whether the pickets are for a new structure or to replace old elements. For a retrofit, photos of the posts and information on their condition are useful.

By |2026-11-15T18:58:43+01:002025-07-11|Knowledge base|Comments Off on How to write an enquiry for metal fence pickets to get a complete quote

Where should you start when choosing trapezoidal steel sheet for a new roof?

First determine what is beneath the roof and what loads the covering must carry. Only then choose the trapezoidal profile height, steel thickness and coating. Felt and a low price do not determine the quality of the entire assembly. A good choice combines the sheet parameters with the support, layers, water drainage and installation plan. An open canopy shelters against precipitation but remains in contact with external air. A heated workshop also requires thermal insulation and moisture control. A roof over a residential area has additional requirements related to comfort. These differences must be established before comparing the sheet itself.

By |2026-11-14T12:52:41+01:002025-06-25|Knowledge base|Comments Off on Where should you start when choosing trapezoidal steel sheet for a new roof?

Mineral wool or PIR: choosing a panel core for a new building

The choice between mineral wool and PIR should follow from the requirements for the wall or roof. A single building may contain zones with different priorities, but combining them requires a design. The core affects the panel's parameters but does not describe the entire product. Comparison also requires the facings, the joint, the fixing and the conditions of use. For one wall, fire compartmentation may be decisive; for another, limited thickness or mass. Establish these conditions before you compare prices. Reject configurations that do not meet the requirements, and compare the remaining ones as complete envelope solutions.

By |2026-11-14T12:51:37+01:002025-06-24|Knowledge base|Comments Off on Mineral wool or PIR: choosing a panel core for a new building

How long does it take to build a house and how do the stages fit together?

The duration of house construction cannot be reliably determined from floor area alone. Rather than a fixed number of days, check whether the schedule accounts for technological pauses, weather and the sequence of handovers between crews. Coordinating the structure and roof is crucial so the building can be closed before further work. Wall technology, floor slab type, roof geometry and the scope of on-site work all affect timing. A simple form may be built faster than a building of the same area with many offsets. Choosing the covering early helps avoid waiting for material.

By |2026-11-14T16:51:11+01:002025-06-21|Knowledge base|Comments Off on How long does it take to build a house and how do the stages fit together?
Back to top