About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

Warehouse layout in a steel building – coordinating racking, doors and deliveries

A high-bay warehouse does not have to be convenient, and a large steel hall does not guarantee efficient goods handling. What decides the outcome is how the racks are arranged, how the gates are positioned and the space between them. Provision must also be made for goods awaiting inspection or collection. It is worth starting the warehouse design from the actual movement of loads and only then fitting it into the chosen building form. The type of goods affects the racking, the height and the method of transport. Pallets, long profiles and small parts require different solutions. A steel hall should accommodate not only the stock but also the operations carried out around it. Add to this the receiving, picking and dispatch zones, if they occur in the given business.

By |2026-11-15T03:58:30+01:002025-10-16|Knowledge base|Comments Off on Warehouse layout in a steel building – coordinating racking, doors and deliveries

How to plan a sandwich panel building from specification to installation?

Sandwich panels allow the designed structure to be closed quickly once the geometry and details have been agreed in advance. Understanding how the panel works helps avoid confusing the insulation with the entire envelope. Follow the path from room requirements, through the material description and cost, to the sequence of installing walls, roof and joinery. A typical panel has two thin metal facings bonded to a core. The layers work together to form an element with different properties than each of them separately. Damage to their bond can affect the performance of the panel, even when the coating looks good.

By |2026-11-14T12:53:27+01:002025-10-12|Knowledge base|Comments Off on How to plan a sandwich panel building from specification to installation?

Is an integrated roof worthwhile for a rental property?

In a rental property, a photovoltaic roof can combine an attractive appearance with energy production, but the benefit must be attributed to specific parties. The owner finances the investment, while the tenant may use the electricity. If the billing arrangements are not clear, even an efficient system does not give the investor a predictable outcome. Before purchase, it is worth establishing how the system will be used, how it will be serviced and how data will be passed on. Only on this basis can the options be compared. This is the first question that must be resolved. If the tenant settles the energy bill themselves, part of the direct benefit may fall to them. The owner receives a different kind of value, for example a better-equipped building. It should not automatically be assumed that the entire cost of the investment will be recovered through a higher rent.

By |2026-11-15T19:00:30+01:002025-10-10|Knowledge base|Comments Off on Is an integrated roof worthwhile for a rental property?

Which roofing materials give a roof a modern appearance?

A modern roof look depends above all on a coherent building form, well-proportioned roof slopes and high-quality details, not on choosing the most fashionable covering pattern. It is worth assessing the whole building, not just a sample of the material. Check whether the profile and colour suit the façade and the windows and doors, whether the layout of the modules and flashings brings order to the roof slope, and whether the technical solutions ensure tightness and durability. If you are installing photovoltaics, decide the panel layout before the roof is built. Also compare the cost of the complete system, including flashings, fixings and installation.

By |2026-11-14T20:14:19+01:002025-10-01|Knowledge base|Comments Off on Which roofing materials give a roof a modern appearance?

Where corrosion starts on steelwork and how to prevent it

Corrosion rarely starts across the entire frame of a steel hall. More often it appears where the coating is damaged, where water is trapped or where dirt accumulates. That is a reason to look during inspections not only at large, easily accessible surfaces. The condition of the structure depends on local conditions. Good protection combines a suitable protective system with detailing that keeps the component in proper condition. A dry, heated warehouse and a humid agricultural hall do not create the same conditions for steel. Moisture, contaminants and substances present in the process all have an influence. Steel structures should receive protection matched to the actual exposure. The building's name alone is not enough to assign a single solution to all its parts.

By |2026-11-15T03:58:40+01:002025-09-22|Knowledge base|Comments Off on Where corrosion starts on steelwork and how to prevent it

How to choose a practical roofing course

Choose a course where you will lay a section of covering and form a detail yourself, not merely watch a finished roof. Check how much time you spend at the workstation and how many people share one roof model. The programme should combine understanding the roof as a layered system with practice: water flow, ventilation and critical junctions. Also ask about training materials, tools and the instructor's assessment of your work. Training organises skills but does not replace design or site experience.

By |2026-11-14T16:51:07+01:002025-09-14|Knowledge base|Comments Off on How to choose a practical roofing course

How to prepare a metal roof for painting

Painting a metal roof makes sense only when the covering is technically sound, not when it is meant to replace a repair. Before choosing a renovation system, assess the continuity of the sheeting and the stability of its fixing, identify corrosion and check the adhesion of the old coating. Flashings, fasteners and the layers beneath the sheeting also need assessment, because a leaking detail will remain the cause of the leak. Establish which areas need cleaning, preparation or replacement, and compare this with the purchase documentation for the material. Where the old finish is unknown, an adhesion test on a small area settles more than general assumptions.

By |2026-11-14T20:13:58+01:002025-09-12|Knowledge base|Comments Off on How to prepare a metal roof for painting

How a roof valley drains the junction between two slopes

A roof valley needs stable support, a continuous underlay and a sufficiently wide drainage path so that water from both slopes can flow freely to the eaves. The most common problems arise from screws placed in the water course, cut pieces that are too narrow, and leaves blocking the valley. Before covering, it is worth checking the geometry where the slopes meet, the evenness of the cut line and the placement of fixings outside the main flow. Also make sure the lower end of the valley discharges water correctly into the gutter and that the membrane beneath the covering has no gaps.

By |2026-11-14T23:57:17+01:002025-08-26|Knowledge base|Comments Off on How a roof valley drains the junction between two slopes

Second-grade 100 mm wall panels for a new hall

A 100 mm wall panel from a cheaper batch may be used in a new hall if its condition and parameters match the project. The term second grade alone does not explain the reason for the price reduction. The assessment should be based on the specific pieces, the visibility of the walls and the cutting plan. This makes it possible to separate an acceptable cosmetic mark from a defect that matters for the performance of the building envelope. The 100 mm dimension specifies the nominal thickness according to the product designation. On its own it says nothing about the U-value, load-bearing capacity or fire resistance. Data for the specific panel are needed: core, facings, fixing and conditions of use. Panels from different systems do not become interchangeable merely because they have a similar thickness.

By |2026-11-14T16:49:17+01:002025-08-20|Knowledge base|Comments Off on Second-grade 100 mm wall panels for a new hall

Omega sections in cladding refurbishment: what can a lightweight subframe achieve?

Refurbishing the building envelope often requires a new mounting plane. The old substrate does not always match the dimensions and layout of the new elements. Omega profiles can help create an orderly subframe. Their hat-shaped cross-section separates the fixing plane from the cladding support. This is a practical feature, but it must be used in the right detail. Cold-formed profiles should complement the identified structure, not conceal its unknown condition. A grid of omegas can define repeatable support lines for the new layer. This makes it easier to position fasteners and coordinate cladding joints. A well-chosen height provides the necessary offset. The solution can be useful for organising the details of a refurbished building envelope. It is worth showing it on a drawing with dimensions from the outset.

By |2026-11-15T18:56:27+01:002025-08-11|Knowledge base|Comments Off on Omega sections in cladding refurbishment: what can a lightweight subframe achieve?
Back to top