About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

Glass fibre laminate facings: where can these panels be used?

The term “fiberglass” usually describes a composite facing made of resin reinforced with glass fibre. On its own it does not state what core the panel has or whether it can serve as a roof covering. In new construction, the full cross-section of the product, its method of support and the environment the surface will be in contact with must be established. The glass laminate forms the surface, while the PIR layer is primarily responsible for thermal insulation. The fibres in the facing do not mean that the interior of the panel is mineral wool. These are different materials with different functions. The name of the surface alone is not sufficient to compare the parameters of the whole product.

By |2026-11-14T12:51:30+01:002026-04-27|Knowledge base|Comments Off on Glass fibre laminate facings: where can these panels be used?

How to check that a set of flashings fits together before installation

On a finished building, the flashings form one visible set. In the order, however, they are dozens of different parts. It is then easy to overlook a difference in gloss, a mirrored cross-section or a missing end. A pre-installation check allows such discrepancies to be detected before they reach the roof and façade. It is worth checking the set by function and by drawings. Matching metre counts alone do not confirm that everything fits together. It is a good idea to divide the flashings into ridge, gables, eaves, openings and lower wall terminations. Ridge caps, barge flashings, gutter aprons and starter profiles then receive a clear place in the schedule. Chimney flashings and unusual corners should have their own markings.

By |2026-11-15T03:59:29+01:002026-04-26|Knowledge base|Comments Off on How to check that a set of flashings fits together before installation

How to assess a roofer before awarding the contract

The quality of a roofer is shown above all by the way they approach preparation and execution. Rather than relying solely on price or years in business, check whether their experience matches your task – a small canopy and a complex house roof require partly different skills. It is also worth noting whether the conversation covers the entire layer build-up, not just the colour of the covering. A professional should identify the points that need to be agreed with the designer and explain what data is needed for a reliable quote.

By |2026-11-14T16:52:00+01:002026-04-26|Knowledge base|Comments Off on How to assess a roofer before awarding the contract

Which information in reviews helps you choose a materials supplier?

Reviews can indicate what contact and order fulfilment are like. However, they do not replace checking the material parameters or the scope of the quote. When buying trapezoidal steel sheet, sandwich panels or hall components, it is worth looking for descriptions similar to your own build. Specific information about a resolved problem gives more than general satisfaction alone. First check what the purchase concerned. Delivery of a few short sheets does not show the whole organisation of ordering long panels for a hall. Material selection has a different significance, as does its transport, and yet another is the execution of the structure. If an entry does not distinguish these scopes, it is difficult to relate the review to your own needs.

By |2026-11-14T12:53:25+01:002026-04-24|Knowledge base|Comments Off on Which information in reviews helps you choose a materials supplier?

Preventing corrosion on a metal roof and spotting when repairs are needed

Before ordering the sheeting, establish the environment the roof will face — the coating should be chosen on that basis, not on colour alone. Check which protective layers the sheet has and whether their intended use suits conditions by the sea, at an industrial site or inside a farm building. During installation, watch the edges, swarf and fixings, since corrosion most often starts there. A single rusty spot does not necessarily mean the steel is damaged, so before any repair it is worth identifying the source and extent of the change.

By |2026-11-15T03:56:33+01:002026-04-23|Knowledge base|Comments Off on Preventing corrosion on a metal roof and spotting when repairs are needed

What determines batten spacing under T18 and T35 roof sheets?

No single batten spacing suits every T18 and T35 sheet. The load capacity depends on the specific product, steel thickness and the loads acting on the roof. Support width, the number of spans and screw placement also matter. Battens transfer loads to the rafters, while counter-battens provide the ventilation gap. The profile name identifies a family, but individual products may differ in geometry and cover width. The project should therefore be checked against the manufacturer's tables.

By |2026-11-14T23:56:58+01:002026-04-19|Knowledge base|Comments Off on What determines batten spacing under T18 and T35 roof sheets?

Comparing two mineral wool panel ranges that look alike

The names of the panel lines suggest different levels of performance, but they do not replace a technical comparison. Two similarly looking mineral wool panels may have a different core construction, joint or fire resistance range. In a new wall, what matters is which need a given variant addresses and what changes it forces in the rest of the building envelope. Before comparing, ask for a full description of both configurations. The difference may lie in the density or type of mineral wool, the facings, additional sealing, the fixing method or the scope of classification. The term “reinforced” alone does not say which parameter has been changed.

By |2026-11-14T10:38:05+01:002026-04-09|Knowledge base|Comments Off on Comparing two mineral wool panel ranges that look alike

How do you choose the colour of steel sheet for the roof, façade and surroundings?

The colour of the steel sheet is best chosen together with the façade, windows and drainage. The RAL designation helps to describe the colour, but it does not say everything about the appearance of the finished surface. Gloss, texture, light and the shape of the trapezoidal steel sheet matter. Before ordering, it is worth viewing a real sample in the place where the roof or wall will be created. First establish the largest surfaces of the building. On a house with a sprawling roof, the covering can strongly influence the perception of the whole form. In a simple hall, the façade may play a greater role. Choose the dominant colour, and only then match the flashings, gate, gutters and small accents. Too many similar but different greys can look accidental.

By |2026-11-14T10:38:56+01:002026-04-06|Knowledge base|Comments Off on How do you choose the colour of steel sheet for the roof, façade and surroundings?

Which panel installation errors can you prevent at the design stage?

Many defects in the building envelope stem from details that were not agreed: a missing purlin, a poorly planned opening or a base element delivered too late. New construction offers the chance to resolve these matters before installation. The check should cover not only the panels but also the structure, services and the sequence of closing details. Ordering lengths before the structure is approved can lead to joints beyond a support or an unsuitable span. The panel type, its facings and the structural scheme must be agreed with the purlin design. The production length is not proof that the entire piece may be spanned without additional support.

By |2026-11-14T12:54:22+01:002026-04-02|Knowledge base|Comments Off on Which panel installation errors can you prevent at the design stage?

What are you actually buying under the name PIR boards? A guide to product characteristics

Two quotes for PIR boards may cover a seemingly similar material but in practice a different scope. Before comparing price, it is worth checking the construction, format and documentation. It also matters how much of the product will actually end up in the building element. Only such a set allows you to assess the purchase cost. A PIR board has a factory-formed core of rigid polyisocyanurate foam. The closed-cell structure helps to limit heat conduction. However, the parameters also depend on the formulation, thickness and facing. You must not attribute the values from one selected catalogue to all boards. The commercial description should state the exact type of finished product. Polyurethane foam alone does not define the facing, edges or intended use.

By |2026-11-15T18:59:39+01:002026-03-30|Knowledge base|Comments Off on What are you actually buying under the name PIR boards? A guide to product characteristics
Back to top