Knowledge base2026-11-15T18:56:00+01:00

Choose a product group

Metal roofing

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Knowledge base

Izoprofil.com helps you compare materials for a specific building project. The guides cover the uses of sandwich panels, PIR insulation boards, metal roof tiles and trapezoidal sheets. The criteria depend on the application, including the supporting structure, thermal performance and requirements for the finished surface. Read the product specifications, identify which dimensions affect the order and compare complete solutions. The articles help you discuss the options with a designer or installer and check the suitability of the selected materials before purchase.

Anchoring a wall plate to a concrete ring beam

Anchor the wall plate to the reinforced concrete ring beam so that it transfers loads from the roof truss. The design specifies the type, diameter, spacing and fixing method of the fasteners, taking into account the concrete, reinforcement, edges and rafter connections. There is no single universal spacing for the anchor bolts. Even a lightweight metal covering needs reliable fixing because wind can create uplift. The wall plate supports the rafters and transfers their forces to the ring beam. Besides compression, horizontal and uplift forces may occur, so merely resting the beam on the wall is insufficient.

IKO enertherm MG: board prices and the complete membrane roof assembly

A flat roof under a synthetic membrane requires a quotation for IKO enertherm MG as a system with that membrane, not for the board alone. A different facing on the board being compared can change the method of fixing, and lambda translates into the required thickness — the cost follows from both conditions. The difficult point is the junction between the membrane and the board surface in the fleece, so it is not enough to price the easy field area. Attach to the enquiry a roof section with the confirmed method of fixing the membrane, together with a measurement of the insulation thickness and the condition of the surface before the covering, so that the supplier does not have to guess the scope.

How much does a system with Utherm Roof LE cost and how should you compare quotes?

Utherm Roof LE is a PIR board for flat and low-pitch roofs, with a core faced on both sides with a multi-layer, gas-tight laminate. When pricing, it is worth starting with the building's architecture: the board format affects cutting and transport, and the roof details require separate work. Compare quotes at the same thermal resistance and with an identical scope of terminations. "Polyurethane boards" and "polyurethane foam" are broader terms than the PIR designation. In a delivery enquiry, state the limited insulation height at the roof parapet with Utherm Roof LE.

Is yellowed EPS still suitable for installation?

A yellow film on white polystyrene may indicate exposure to UV radiation. The change in colour alone does not determine whether the whole board is suitable for use. The surface, flatness, cohesion and storage conditions must be assessed. Removing the loose layer is sometimes necessary, but it will not repair deep damage or deformation caused by temperature. White EPS left without protection may change colour at the surface over time. Sunlight affects the exposed layer of polystyrene. With continued exposure, dusting and loss of cohesion may occur. This is particularly important where mortar is to be adhered to the board or a reinforced layer is to be applied. The rate of change depends on the actual conditions.

Corrugated fibre cement for a modern barn-style building

A simple form with a high roof shows the character of the material well. Fibre cement sheets can give a modern barn a calm rhythm and a mineral surface. However, asbestos-free fibre cement must be matched to the actual function of the building. A residential house requires a different building envelope from an agricultural shelter with a similar silhouette. The term modern barn may conceal a house, a commercial unit or a recreational building. Each has different needs regarding heating, humidity and services. The function must be established before choosing the covering. An external resemblance to a traditional building does not justify copying its layer arrangement. It is also worth determining whether there will be a usable attic or an open, high interior beneath the roof.

Questions to ask before buying XPS: properties matter more than colour

A well-chosen XPS can reduce heat losses in the damp or load-bearing part of a building. To benefit from these advantages, you need to buy the right grade. Extruded polystyrene does not have a single set of parameters for all thicknesses and applications. The colloquial term Styrodur is too general for placing an order. A few precise questions allow you to compare offers without basing the decision on the colour of the board. The first question should concern the function, not the price. XPS under a floor, at a foundation wall and in an inverted roof works under different conditions. You must tell the seller the location of the material, the expected contact with water and the type of load. Extruded polystyrene has many applications, but the scope of a specific product must be confirmed.

Back to top