Knowledge base2026-11-15T18:56:00+01:00

Choose a product group

Metal roofing

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Knowledge base

Izoprofil.com helps you compare materials for a specific building project. The guides cover the uses of sandwich panels, PIR insulation boards, metal roof tiles and trapezoidal sheets. The criteria depend on the application, including the supporting structure, thermal performance and requirements for the finished surface. Read the product specifications, identify which dimensions affect the order and compare complete solutions. The articles help you discuss the options with a designer or installer and check the suitability of the selected materials before purchase.

How to prevent leaks in a sheet metal roof

A metal roof stays watertight when the covering suits the actual roof pitch. Before buying, check the pitch, the rafter length and the planned roof penetrations. The minimum angle for one sheet model does not apply to all products of similar appearance, including T18 and T35 profiles. On a gentle slope water flows more slowly, so lap lengths, seals and the position of joints matter more. The corrugation height marking alone does not describe the entire roof system.

How long does trapezoidal steel roofing last?

No single service life applies to every trapezoidal sheet, because durability depends on the steel, surface protection, environment and roof workmanship. When choosing, check the full specification: core thickness, type of metallic layer, organic coating and suitability for a specific environmental category. The profile symbol alone, such as T18 or T35, indicates a family rather than a service period. Assess load-bearing capacity and corrosion resistance separately. A guarantee is a commitment on stated terms, not a forecast of exact service time. Leave design decisions to the designer.

What is an Oborniki sandwich panel and what loads does it carry?

A sandwich panel is the colloquial name for a composite panel used as building cladding. In a typical metal panel, an insulating core bonds two thin facings. The element can perform several functions at once, but it needs suitable supports and details. Understanding this construction helps distinguish the panel from the insulation alone and from the main structure. The facings and core form a composite element. Its behaviour depends on their interaction, so damage to the bond between them has a different significance from a small surface scratch. Parameters must be assessed for the whole product, not by adding up the properties of the separate materials.

Can a supplier put together a complete cladding order for your building?

A large selection of panels and sheets is helpful if a compatible enclosure for a specific building can be assembled from it. When choosing a sales centre, check how products are identified, the availability of documents and the completeness of accessories. A good conversation begins with the function of the hall and its drawings, and ends with an unambiguous schedule of materials. The seller should know whether you are putting together a roof, façade, internal wall or cold store. Information about the floor area is important but not sufficient. The conditions inside, the location, and the layout of supports and openings are needed. An answer concerning a specific solution is more valuable than a general assurance that every panel is suitable for a hall.

How much does a new sandwich panel roof cost once all the details are added?

The cost of a sandwich panel roof should be calculated from the geometry of the roof slopes and the detail design. The price of the panels does not automatically include the eaves, ridge, fasteners, seals or equipment work. An example budget shows how to combine these items and obtain a comparable cost per metre of finished roof, without mixing it with the hall floor area. Let us assume a building with a footprint of 12 × 24 m, i.e. 288 m². After taking into account the pitch and eaves, the designed slopes in the example are 6.25 × 24.4 m each. In total this gives 305 m² of roof. It is this area that must be distinguished from the footprint. Further ordering also results from the covering modules and the cutting of the panels.

Can a metal roof help cut energy use?

In a metal roof, insulation and airtightness do most of the work of limiting heat loss. Tile-effect metal sheets and T18 trapezoidal sheets can both cover a well-insulated loft. On a hall, a suitable sandwich panel can provide an insulated roof in a single unit. PIR insulation offers high thermal resistance at a relatively small thickness. The colour of the covering affects how hot the surface becomes, but it is only one factor in the building’s thermal performance. Thin steel conducts heat readily. Its main role on the outside of the roof is to keep rain out.

Back to top