Knowledge base2026-11-15T18:56:00+01:00

Choose a product group

Metal roofing

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Knowledge base

Izoprofil.com helps you compare materials for a specific building project. The guides cover the uses of sandwich panels, PIR insulation boards, metal roof tiles and trapezoidal sheets. The criteria depend on the application, including the supporting structure, thermal performance and requirements for the finished surface. Read the product specifications, identify which dimensions affect the order and compare complete solutions. The articles help you discuss the options with a designer or installer and check the suitability of the selected materials before purchase.

Choosing starter profiles for different façade plinth details

The bottom line of the façade is seen up close. It shows the accuracy of execution and how the wall connects to the plinth. Starter profiles can help to tidy up this zone, but their cross-section depends on the construction of the cladding. A recessed plinth needs a different solution from one projecting in front of the face. Ground levels and the proximity of doors and gates also matter. The selection should be based on the full cross-section, not only on the expected visible height of the trim. A recessed plinth creates a distinct undercut beneath the façade. A projecting plinth may require its top surface to be covered and water to be drained away from the junction. These situations differ in geometry. They should not be resolved by using the same trim without checking its position.

Eurothane G insulation costs: materials and finishing work

The price of Eurothane G covers the composite product, but not the entire insulation service. The cost estimate must include preparing the wall, fixing and finishing. Only such a scope can be reliably compared with the variant in which insulation and lining are carried out separately. Recticel Eurothane G consists of a PIR board faced on both sides with a gas-tight facing and 12.5 mm plasterboard. It is intended for suitable internal insulation applications. An enquiry for PIR boards should describe the internal wall lining that connects Eurothane G PIR with 12.5 mm plasterboard. The masonry beneath Eurothane G must be prepared in accordance with its condition and the requirements of the new build-up.

C-sections for future alterations: preparing building walls for business growth

A company may need a larger gate, additional rooms or a new production line after a few years. It is worth discussing these plans already during the design of the hall. C-section profiles can be a useful element of its walls and substructure. However, they do not provide unlimited freedom for reconstruction. Cold-formed profiles can be well prepared for anticipated changes if it is known what is to change and what loads may arise. The arrangement of columns, rails and panels determines the available places for openings and partitions. It is worth checking where a gate or passage may be created in the future. This does not have to mean making all openings straight away. It does, however, allow a layout to be chosen that does not conflict with the actual plan. This is more advantageous than later cutting out a random section of the substructure.

Budget for a metal picket fence: how do you calculate the cost of the whole project?

A fence quote is easily underestimated if only the visible pickets are counted. Supports, connections and labour are also needed for the project. A new fence has a different scope from replacing the infill. Instead of looking for a single universal price per metre, it is better to create a clear budget. Every item should come from the same design and a clearly described quantity. Record the run length, heights, number of bays, the gate and the pedestrian gate. Determine whether the structure already exists. If it does, an assessment of its condition and any repairs must be included. New metal pickets do not remove the cost of bringing the support into proper condition. It is worth identifying this before comparing options.

Planning a patio roof: covering, supports and drainage

Begin by marking out the zone the roof is actually meant to shelter, rather than relying on the terrace's floor area. Indicate the table, chairs and main passage, since wind can carry raindrops under the open sides. Match the size, pitch, structure and drainage to this. T18 or T35 profiles form a lightweight covering, while a sandwich roof panel limits heat loss through the roof surface itself. Keep in mind daylight in the room, condensation beneath the metal and the junction with the wall. Load capacity and fixings need calculation, not floor area alone.

Choosing a classic or contemporary tile-effect profile for a house

Choose the roof tile profile only after comparing a sample with the house's form, façade and planned details, not solely under the influence of fashion. A classic pattern and modern geometry can share similar material parameters, so shape does not determine durability. Check the coverage width, module length, edge details and the full set of accessories. Assess colour and texture outdoors, in sun and shade, because a screen distorts hue. Remember that the final effect also depends on careful installation and an even substructure.

Back to top