+48 500 409 109

Metal fence picket deliveries: arranging the date and unloading

Fence delivery requires more than just providing an address. You need to know where the vehicle can pull up, how the material is unloaded and where the pickets will wait for installation. An early arrival is not always an advantage if the structure is not ready. Well-planned logistics help preserve the coating and reduce unnecessary moving of the metal fence pickets. Check when the posts, rails and surfaces requiring prior treatment will be ready. If work generating filings or dirt will still be going on nearby, take this into account in the plan. The pickets are a finished element. They should not be left waiting at a random work station.

By |2026-11-15T18:59:08+01:002026-01-07|Knowledge base|Comments Off on Metal fence picket deliveries: arranging the date and unloading
Read More

When should you choose PIR boards 120 × 60 cm and when a larger format?

The PIR format affects the number of joints, ease of working and the amount of offcuts. A small board can make it easier to insulate reveals, while a large one can speed up covering a regular surface. However, dimensions must be checked for the specific variant and edge profile. The nominal rectangle area is not always equal to the effective coverage area. Within insulation board families, 1200 × 600 mm and 1200 × 2400 mm are found among others. This does not mean that every type of facing is available in both dimensions. A composite board with gypsum may have a different format, for example 1200 × 2600 mm. Information about the dimension must therefore accompany the full product description.

By |2026-11-14T10:38:52+01:002026-01-05|Knowledge base|Comments Off on When should you choose PIR boards 120 × 60 cm and when a larger format?
Read More

How to determine the spacing of wall supports when wind acts unevenly?

A single support spacing does not suit every wall made of sandwich panels. Wind acts differently on the centre of the façade, the corner and a building with a large open gate. Colour, cladding and the arrangement of bays also come into play. The spacing must be determined for the specific panel and building conditions, then coordinated with its openings. The designer needs the location, dimensions and height of the building, the roof geometry and information about the surroundings. Large openings and the conditions under which they may remain open also matter. These data yield the external and internal actions needed to verify the envelope.

By |2026-11-14T12:54:02+01:002026-01-04|Knowledge base|Comments Off on How to determine the spacing of wall supports when wind acts unevenly?
Read More

How to assess laminate cladding for a building exposed to ammonia?

In a livestock building, the durability of the enclosure depends on the entire system of surfaces, joints and fixings. Glass laminate may be considered as cladding for a demanding interior, but the term "ammonia-resistant" alone is too general for design. The service conditions and the confirmed scope of application of the specific panel are needed. Gather data on temperature, humidity, ventilation and the compounds present in the room. Not only typical conditions matter, but also cleaning periods and changes between use cycles. The surface may come into contact with condensate and preparations other than those resulting from the presence of animals alone.

By |2026-11-14T12:53:14+01:002026-01-03|Knowledge base|Comments Off on How to assess laminate cladding for a building exposed to ammonia?
Read More

What does 100 metres of sheet metal in an order mean and how do you convert the price?

The phrase '100 metres of sheet metal' does not yet specify the quantity of covering. It may mean linear metres of sheets or square metres calculated in two ways. The difference affects the price and the number of runs on the roof. First establish the unit and the width of the specific profile. Then convert full sheets, accessories and delivery into one common scope. A linear metre describes the length of a sheet at its fixed width. A total square metre takes into account the full width of the sheet. An effective square metre results from the coverage width after the specified side lap is made. This is not always the area of the finished roof, because cuts and possible transverse joints remain.

By |2026-11-14T12:53:43+01:002025-12-23|Knowledge base|Comments Off on What does 100 metres of sheet metal in an order mean and how do you convert the price?
Read More

How to choose the length of sandwich panels for the building and transport?

The length of wall and roof panels must be agreed with the supports, the colour of the cladding, transport and the crane working area. It is worth doing this before the building geometry is finalised. A single panel over the full façade height or from eaves to ridge can reduce joints, but requires efficient organisation of the entire construction. On the façade, the length depends on the installation direction. With a vertical layout it refers to the height of the bay, and with a horizontal layout to the wall sections and the arrangement of supports. Draw out the windows, doors and joints. Check the production format of the wall panel in its documentation, without transferring dimensions from the roof family.

By |2026-11-14T12:53:47+01:002025-12-22|Knowledge base|Comments Off on How to choose the length of sandwich panels for the building and transport?
Read More

How to prepare for a safe roof replacement

Before ordering new covering, assess the old roof and its trusses. Establish where leaks originate, and check the timber and connections. Bear in mind that some defects may stay hidden until removal, so allow for extending the works. Lightweight metal sheeting makes renovation easier but will not repair a damaged structure. Before work, provide safe access, fall protection and protection of the building from rain. Plan deliveries, waste space and inspection of details.

By |2026-11-14T20:12:18+01:002025-11-28|Knowledge base|Comments Off on How to prepare for a safe roof replacement
Read More

Roof flashings: what they do and where they are needed

Roof flashings safeguard the edges and junctions of the covering, channelling water away so it cannot get beneath the roof. They include eaves strips, bargeboards, valleys and components around the chimney, matched to the slope and sheet metal. Though sometimes decorative, their shape, laps and fixing determine tightness. The sheet alone is insufficient at terminations, openings and bends – flashing sets a controlled drainage path, even in wind-driven rain.

By |2026-11-14T20:13:42+01:002025-11-26|Knowledge base|Comments Off on Roof flashings: what they do and where they are needed
Read More

How to assess second-grade steel sheet for its intended use

The designation “second grade” does not in itself say what is wrong with the sheet metal. It may concern appearance, format or another characteristic of a specific batch. Before buying, you need to know the reason for the classification and inspect the material. Only then can you assess whether it is suitable for a roof, façade or cladding. A lower price does not replace the information needed for such a decision. Ask for a description of the actual difference compared with full-value material. An assurance that the defect is minor is not enough. What matters is where it occurs and what it concerns. A difference in shade has a different consequence from a damaged edge, a distorted trapezoidal profile or a break in the continuity of the surface protection. It must not be assumed that every discounted sheet has only an aesthetic defect.

By |2026-11-14T16:50:04+01:002025-11-26|Knowledge base|Comments Off on How to assess second-grade steel sheet for its intended use
Read More

How should you plan a budget contingency when buying a photovoltaic roof?

A budget contingency should not be an arbitrary percentage added to the quote. It is best to tie it to specific unknowns: the condition of the structure, the scope of preparation, access and installation requirements. For a new house, some of the risk can be clarified in the design. For a renovation, some information will only come to light once the layers are exposed. A good cost estimate shows what is fixed and what requires a further decision. The roof geometry, the number of active fields and the scope of equipment should be specified as precisely as possible. A site inspection also makes it possible to establish access, storage and the necessary access for the works. The more specifics there are, the fewer items based on a general assumption. However, an initial estimate based on a few photos should not be presented as the final price for a complete installation.

By |2026-11-15T19:00:12+01:002025-11-13|Knowledge base|Comments Off on How should you plan a budget contingency when buying a photovoltaic roof?
Read More
Back to top