+48 500 409 109

About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

How to compare metal fence picket quotes when each one shows a different price?

The lowest number in a quote does not necessarily mean the lowest cost of a finished fence. The price may relate to a piece, a metre of picket or another scope. Different coatings and accessories are added to this. It is therefore worth starting the comparison by standardising the data. Only then can you assess which proposal meets the needs. Sheet metal pickets should be compared as specific products, not similar photos. Prepare one fence description and send the same data to the quotes being compared. Specify the numbers, lengths, layout and finish. If one proposal is based on a different spacing, ask for clarification. A different number of pickets changes the price even for the same boundary length.

By |2026-11-15T18:58:45+01:002026-07-05|Knowledge base|Comments Off on How to compare metal fence picket quotes when each one shows a different price?
Read More

Where does a roof slope need a ventilation outlet?

A roof-slope ventilation element is needed when the design or the covering instructions require supported airflow within the roof layers, especially on a long slope or where a window or chimney interrupts the channel. It does not replace a clear inlet and outlet. Before choosing, check that the gap has an inlet, an unobstructed route and an outlet, and that the element matches the covering profile and roof pitch. Its location follows the design and instructions, not a general rule.

By |2026-11-14T23:57:14+01:002026-07-01|Knowledge base|Comments Off on Where does a roof slope need a ventilation outlet?
Read More

In what order should the panels be installed so that the walls and roof form a tight envelope?

A tight envelope is created by following the correct sequence of work on the walls, roof and openings. Simply screwing the panels to the steel is only part of the job. The base must be prepared beforehand, the sealing layers joined and access left to areas that will later be covered by flashings. This allows subsequent teams to work without redoing completed sections. On the envelope drawing, mark out the wall sections, the laying direction and the working zones. Indicate which elements must be installed before the panels: base rails, tapes, parts of the flashings and the substructures for openings. Adapt the sequence to the chosen system. There is no single rule that in every building you always start with the same building element.

By |2026-11-14T12:52:55+01:002026-06-26|Knowledge base|Comments Off on In what order should the panels be installed so that the walls and roof form a tight envelope?
Read More

How do you fix sandwich panels to a new masonry wall?

A masonry wall can serve as a substrate for sandwich panel cladding, but it does not remove the need for a fixing design. The masonry must be assessed, the load path determined and the space between the layers resolved. On a new building, anchoring and openings can easily be planned in advance. This helps avoid random spacings and repairs to freshly completed façade. The type of masonry units, their strength, voids, mortar and the quality of workmanship all matter. A fixing chosen for concrete is not automatically suitable for hollow block masonry. The design must specify the loads, the substrate and the permitted anchoring solution.

By |2026-11-14T12:52:42+01:002026-06-24|Knowledge base|Comments Off on How do you fix sandwich panels to a new masonry wall?
Read More

Buying sandwich panels in 2026: seven decisions that affect the final bill

Savings on sandwich panels start with project coordination. The price per metre is one element, alongside cutting patterns, partition requirements and installation method. Seven decisions made before ordering allow equivalent variants to be compared and limit expenses that usually appear only after purchasing the material. Separate the wall area from the area of purchased panels. The covering module, openings and shape of the last field determine the number of elements. An allowance adopted without a drawing may be too small on a complex façade or unnecessarily large in a regular layout. List lengths and quantities instead of rounding the square metreage alone.

By |2026-11-14T12:53:10+01:002026-06-17|Knowledge base|Comments Off on Buying sandwich panels in 2026: seven decisions that affect the final bill
Read More

How much should you budget for a house with sandwich panels and what does the cost cover?

The price of a house with sandwich panels must be calculated from the scope of the finished building. Square metres of panels do not include foundations, structure, windows or services. Before comparing quotes, it is worth breaking these parts down separately and defining the finishing standard. Only then does a lower cladding price matter for the overall budget. Let us assume a single-storey house with 100 m² of usable floor area, a compact form and a simple roof. Sandwich panels form its designed cladding on a separately selected structure. This is a calculation assumption. Not every panel family is intended for such an application, and the structural system must correspond to the house design.

By |2026-11-14T12:54:15+01:002026-06-17|Knowledge base|Comments Off on How much should you budget for a house with sandwich panels and what does the cost cover?
Read More

Does non-combustible wool mean a non-combustible and fire-resistant wall?

Mineral wool is associated with fire protection, but a sandwich panel also contains steel sheets, coatings and bonding layers. The reaction-to-fire class of the whole product need not be the class of the core alone. The fire resistance of the wall is determined separately. These distinctions help to select the cladding correctly and to avoid unjustified promises. The core, the complete panel and the wall installed on a structure are three different levels of assessment. Information about the wool does not replace the declaration for the panel with metal facings. Similarly, a result for the panel does not automatically describe every method of its installation.

By |2026-11-14T10:38:03+01:002026-06-17|Knowledge base|Comments Off on Does non-combustible wool mean a non-combustible and fire-resistant wall?
Read More

Choosing a roofer and agreeing the scope of work

Choose a roofer based on projects similar in material and complexity, not price alone. Check whether the team knows the installation instructions for the selected system and can point to the document they use. Before work starts, agree materials, details, dates and the handover method, as well as how additional work will be settled. With metal roof tiles and trapezoidal sheets, flashings, fixings and ventilation are particularly important. Look at details in photos and, with the owner's consent, a finished roof – a distant overall view does not show the quality of edges and finishes.

By |2026-11-15T03:57:41+01:002026-06-10|Knowledge base|Comments Off on Choosing a roofer and agreeing the scope of work
Read More

What goes beneath a roof covering and how to choose the underlay

A layer of underlay is laid beneath the roof covering to take over water that gets under the tiles or metal sheet, as well as condensation. When choosing the underlay, check whether it works with the selected covering, the pitch and the whole roof build-up, not just whether it has good parameters. Continuity of the system at the eaves, chimney and penetrations is also important. The underlay should not be confused with a vapour barrier or insulation. The method of support depends on the product, so verify the intended use of the membrane or rigid underlay and the requirements for vapour flow and ventilation.

By |2026-11-14T23:58:16+01:002026-06-08|Knowledge base|Comments Off on What goes beneath a roof covering and how to choose the underlay
Read More

How to choose a contractor for an integrated photovoltaic roof?

The installer should understand both the roof and the electrical installation, or ensure well-organised cooperation between the two trades. The number of ordinary panels installed alone does not confirm experience with an active covering. It is worth checking completed projects, documentation, the quoting method and after-sales service. A good choice is not about finding the longest list of promises, but about assessing specific answers relating to your own building. Ask for examples of roofs completed in the system under consideration or in a solution of comparable construction. Not only drone photos matter, but also details at windows, chimneys and edges. If possible, it is worth seeing a finished building from a normal perspective.

By |2026-11-15T19:00:16+01:002026-06-06|Knowledge base|Comments Off on How to choose a contractor for an integrated photovoltaic roof?
Read More
Back to top