Knowledge base
Izoprofil.com helps you compare materials for a specific building project. The guides cover the uses of sandwich panels, PIR insulation boards, metal roof tiles and trapezoidal sheets. The criteria depend on the application, including the supporting structure, thermal performance and requirements for the finished surface. Read the product specifications, identify which dimensions affect the order and compare complete solutions. The articles help you discuss the options with a designer or installer and check the suitability of the selected materials before purchase.
Internal insulation for a new house on the plot boundary
For a wall close to the plot boundary, every centimetre counts, but a thin insulation layer is only part of the decision. The permissible building layout, fire protection and the behaviour of the wall after internal insulation must all be taken into account. The best moment for these decisions comes before choosing the construction and routing the services. The building's position and the wall detail at the boundary require an assessment of the design. Internal insulation does not settle the question of permissible location, openings or the relationship with the neighbouring structure. It also does not give the right to extend flashings, foundations or insulation beyond the land at your disposal.
How to trace a roof leak and plan the repair
First limit damage inside and ensure safety, then determine whether the water comes from precipitation or condensation. Check whether the leak appears only with rain from a particular direction, during thaw or at low temperature – this helps narrow the search. The damp patch need not lie beneath the damaged covering, as water can travel through roof layers. The inspection should cover flashings, penetrations, laps, fixings and drainage, rather than random application of sealant.
How to cost a mineral wool panel wall, including fixings and installation
The price per square metre of a wall panel is not the price of the finished façade. In new construction, edge-closing elements, seals, fixings and installation must be added. It is also worth checking which area is subject to settlement. The calculation below shows the method using explicitly assumed amounts, without presenting them as a current quote. The enquiry should specify the core, thickness, type of fixing, facings and required parameters. For panels with mineral wool, the fire variant and the associated accessories are also important. Prices for two panels of the same nominal thickness may cover different ranges of properties.
How to compare the prices of wall and roof sandwich panels in 2026?
Wall and roof panels must be priced as different parts of a single building envelope. They differ in geometry, accessories and operating conditions, so a single price per square metre for the whole building can be misleading. The comparison method below organises quantities and scope, and the example amounts show the mechanics of the calculation without pretending to be a current market offer. For the wall, state the vertical or horizontal layout, cover width, thickness, facings and openings. For the roof, add the pitch, lengths, transverse joints and rooflights. In both parts, specify the internal conditions and the project requirements. Such a description allows prices to be compared without mixing different products.
XPS or mineral wool? Different tasks in one building
XPS and mineral wool restrict heat flow, but they do so as materials with distinctly different structures. Extruded polystyrene is a rigid foam, while mineral wool has a fibrous structure. This gives rise to important differences in application. The colloquial name Styrodur does not describe these properties. A comparison should cover not only thickness but also moisture, loads, and fire and acoustic requirements. A foundation is in contact with the ground, a loft has different moisture conditions, and a partition wall may need to absorb sound. No single material can be identified as the best for all these locations. XPS is selected where its combination of properties matches actual needs.
Metal façade cladding: benefits and common installation mistakes
Metal cladding on a façade provides a regular surface and a clear division of the building volume, but it does not itself insulate the wall. Before choosing, check whether the product and detail allow the planned installation direction, and at corners and openings — the quality of flashings and water drainage. Also compare complete solutions: the substructure, coating, fixings and any insulation. If an insulated partition is needed, a sandwich panel is an alternative. Leave the decision on layout and component selection to the designer.





