When do the advantages of sheet metal roofing matter most?

A sheet-metal roof can be light and quick to install, yet its advantages emerge only when weighed against a specific project. Check the load-bearing capacity of the existing roof structure, the batten spacing and the fixing method, because the sheet alone does not relieve the structure without verification. For a renovation, compare the cost of preparing the substrate and the full layer build-up, not just the weight per square metre of covering. The choice of profile and sheet format should suit the roof shape and the number of details. Leave the decision to use sheet metal to the designer, who will assess pitch, loads and the required coating protection.

By |2026-11-14T16:52:19+01:002022-12-02|Knowledge base|Comments Off on When do the advantages of sheet metal roofing matter most?

Choosing an external window sill that drains rainwater away

An external sill directs water away from the façade and protects the window-to-wall junction. Tightness depends on the slope, side terminations and connection to the frame, not on the material alone. Steel sills are lightweight and easy to colour-match to roof sheeting. Aluminium, stone and other options have different installation requirements. The variant must suit the insulation and the actual width of the recess. Water from the glass and frame must not enter the gap beneath the window – the sill catches it and leads it beyond the façade face thanks to a slope and drip edge. If water seeps underneath and returns to the render, colour is irrelevant.

By |2026-11-14T23:58:03+01:002022-11-27|Knowledge base|Comments Off on Choosing an external window sill that drains rainwater away

How to calculate the cost of a roof with Thermano Roof and compare variants?

A roof with Thermano Roof is worth pricing in several variants that meet the same requirements. The difference in the price of the board is only part of the calculation. Fixing, details, work on installations and possible changes to the geometry of the covering must be calculated separately. Thermano Roof is a rigid PIR board with a gas-tight multilayer aluminium facing on both sides. The manufacturer specifies it for, among other things, flat roofs and above-rafter insulation. An enquiry about PIR boards should describe the pitched roof slope on which the insulation is to be placed above the wooden rafters. The Thermano Roof layer above the rafters must be connected with the terminations at the eaves and openings.

By |2026-11-16T02:21:35+01:002022-11-19|Knowledge base|Comments Off on How to calculate the cost of a roof with Thermano Roof and compare variants?

Metal shingle roofing or tile-effect sheets: how do they differ?

Shingle-effect metal roofing uses profiled steel to reproduce the pattern of overlapping timber shingles. It is available with a coated or stone-coated finish. To choose a system, check the data sheet and fitting instructions for the particular profile. The name alone tells you little about steel thickness, effective cover width or how the joints keep out rain. Check the permitted pitch, batten spacing and support at the eaves, and leave room for flashings around roof windows and chimneys. Compare those details alongside the appearance when choosing between shingle-effect and tile-effect sheets.

By |2026-11-15T00:02:07+01:002022-11-13|Knowledge base|Comments Off on Metal shingle roofing or tile-effect sheets: how do they differ?

Specification for fence picket production: what to check in the latest version?

The quote, sample and measurement lead to a single document according to which the material will be prepared. This is the moment to check that all arrangements are consistent. Metal fence pickets made exactly to the wrong table will still not fit the project. The final specification should be readable by someone who did not take part in the earlier discussions. Every important feature must follow from the written record. The document should be dated and clearly identified. If dimensions were changed earlier, the old list must be clearly replaced by the current one. Do not leave the supplier with several files marked “please take the latest comments into account”. The final version should contain those comments in the body of the text.

By |2026-11-15T18:59:27+01:002022-11-12|Knowledge base|Comments Off on Specification for fence picket production: what to check in the latest version?

Common causes of roof window faults and complaints

Roof window problems often arise from product choice, installation or the conditions inside the attic. Water on the pane does not always signal a leak, and condensation need not mean a faulty seal. Check the flashing, the junction with the metal sheet, the insulation and the ventilation. A careful order and installation records cut the risk of mistakes and help identify what caused the fault. The window must suit the roof pitch, how the interior is used and the intended fitting; its size and position within the structure also count. A larger window may call for changes to the roof truss, and rafters should not be cut without a design for transferring loads. For thermal assessment, the whole-window value is distinct from that of the glass alone.

By |2026-11-14T20:37:04+01:002022-11-06|Knowledge base|Comments Off on Common causes of roof window faults and complaints

Snow fences or individual snow guards? Choosing protection above entrances and along the eaves

First establish which areas beneath the roof are most exposed to sliding snow, and only then choose between snow fences and point snow guards. Check the roof pitch, local snow loads and how forces are transferred to the structure — matching an accessory's colour to the sheet metal is not enough on its own. Snow fences form a continuous barrier, whereas point elements work in a specific layout, so their function and spacing need separate assessment. Bear in mind that protection does not remove the need to monitor snow quantity and roof condition.

By |2026-11-15T03:57:57+01:002022-11-01|Knowledge base|Comments Off on Snow fences or individual snow guards? Choosing protection above entrances and along the eaves

Comparing sandwich panel offers across Poland

The most favourable panel offer does not always have the lowest price per square metre. When comparing suppliers from different parts of Poland, lengths, cutting patterns, accessories and transport conditions matter. It is worth calculating the cost of the material that will actually go into the building envelope and separating it from the value of the purchased pack alone. One offer may quote a price per square metre of covering, another per piece, and a third per whole pack. Bring them all down to the number of panels with known dimensions and usable area. Do not automatically compare a roof panel with a flat wall panel of the same thickness. Their geometry and role in the building are different.

By |2026-11-14T12:52:25+01:002022-10-31|Knowledge base|Comments Off on Comparing sandwich panel offers across Poland

How to compare offers for PIR boards without hidden gaps in the bill of quantities

Two offers for PIR boards can have the same thickness and a completely different scope. A reliable comparison should cover the parameters, the facing, the accessories and the installation. It is also worth checking the coverage area, transport and preparation costs. Only then does the price become useful information. PIR boards can look similar yet have different facings, strength and intended use. Before purchase, a current technical data sheet, a declaration of performance and installation instructions are needed. The product variant should be described without abbreviations that cause confusion. In the enquiry, it is worth stating the full board specification and the conditions in which it will work.

By |2026-11-16T02:21:10+01:002022-10-29|Knowledge base|Comments Off on How to compare offers for PIR boards without hidden gaps in the bill of quantities

When do outlet mineral wool wall panels save money on a new build?

A second-grade mineral wool panel may suit a new build if its limitations are known before the elevation is drawn. The saving depends on the area that can actually be installed. Joints, claddings and documents must also be checked, because a visual defect and a loss of tightness have entirely different consequences. In a new hall, the outlet is best assessed against a specific wall drawing. Mark the gates, windows, corners and plinth height. Only then compare the lengths of the available panels with the sections between supports. A short panel may fill the strip above a window well while being unsuitable for the entire adjacent field.

By |2026-11-14T10:37:13+01:002022-10-27|Knowledge base|Comments Off on When do outlet mineral wool wall panels save money on a new build?
Back to top