How to choose the colour of a corrugated roof to suit its surroundings?

The roof colour is best assessed together with the building form, the façade and the landscape. Corrugated fibre cement sheets have a pronounced profile that changes how the colour is perceived through light and shadow. Asbestos-free fibre cement should be chosen on the basis of a real sample. A small rectangle of colour on a screen does not show what will be visible across the whole roof slope. In an open landscape the roof may be visible from a great distance. In dense development it is more often viewed up close, between the neighbours' façades. It is worth checking both points of view. The same shade can be a calm background in one place and a strong accent in another. Lasting features of the plot also matter: trees, paving, fencing and the colour of neighbouring buildings.

By |2026-11-15T19:00:47+01:002023-01-28|Knowledge base|Comments Off on How to choose the colour of a corrugated roof to suit its surroundings?

Matt or gloss coating for tile-effect metal roofing?

Choosing between matt and glossy metal roof tiles is not a simple matter of better versus worse — the type of coating, its properties and its intended use are what count. Before judging appearance, check corrosion and UV resistance, the metallic layer protecting the steel, and maintenance requirements. Compare specific data, not just the two finish names. View the colour outdoors, on several joined sheets, in sun and shade. Remember that durability also depends on the environment, installation and maintenance, and matching the look to the house makes sense only once the material meets the roof's technical requirements.

By |2026-11-14T16:51:48+01:002023-01-23|Knowledge base|Comments Off on Matt or gloss coating for tile-effect metal roofing?

IKO enertherm ALU TAP: how to check that a quotation is complete

With ALU TAP, the completeness of a quotation is decided not by the number of line items but by whether the tapered boards match the drainage layout plan. For each slope, the components must be specified and assigned to specific drainage areas, and the junction between areas draining in different directions must be listed separately. In your enquiry, describe the roof with aluminium-faced tapered boards at different slopes and the intended finished result, attaching the drainage layout plan showing slopes and heights. Also agree the terms for supplementary delivery, because a shortage of a few of the right parts can hold up the covering of a larger area.

By |2026-11-16T02:22:38+01:002023-01-06|Knowledge base|Comments Off on IKO enertherm ALU TAP: how to check that a quotation is complete

Why must sheet thickness be selected together with the profile and supports?

There is no single sheet thickness suitable for every roof. The sheet works together with the ribs, supports and fasteners. The choice of 0.5 or 0.7 mm should follow from the load and the specific section. Thicker material can improve the properties of the system, but it will not fix faulty construction or incorrectly selected fasteners. It must be established whether the stated value describes the nominal steel thickness and according to which rules it has been declared. Protective coatings are separate layers. Measuring the total thickness of the finished sheet does not automatically separate them from the core. Therefore, simply applying a calliper does not replace identifying the material.

By |2026-11-14T12:53:32+01:002023-01-03|Knowledge base|Comments Off on Why must sheet thickness be selected together with the profile and supports?

What changes when you choose trapezoidal steel sheet instead of tile-effect metal roofing on a new house?

Trapezoidal steel sheet can suit a house just as well as tile-effect metal roofing if the design accounts for it. The difference does not end with appearance. Both coverings have different geometry, support and details. It is worth comparing them before installing battens and flashings. A later change may require more work than the difference in sheet price suggests. Trapezoidal sheet forms continuous lines running in the direction of the roof slope. Tile-effect metal roofing adds a transverse division that resembles rows of tiles. Flat modular versions give yet another effect than traditional waves. It is therefore worth comparing specific profiles rather than two general material names.

By |2026-11-14T10:36:53+01:002022-12-26|Knowledge base|Comments Off on What changes when you choose trapezoidal steel sheet instead of tile-effect metal roofing on a new house?

Fitting gutters: where leaks start at the eaves

Begin by establishing how water will travel from the roof edge all the way to the ground-level receiver. Match the gutter and downpipe cross-sections to the roof area draining into that section and to the outlet arrangement. Check the fall, bracket spacing and extra supports at corners and outlets. Connect the gutter to the eaves flashing while keeping joints watertight and free to move. Allow for the façade thickness so pipes and brackets do not clash with insulation.

By |2026-11-14T23:57:48+01:002022-12-24|Knowledge base|Comments Off on Fitting gutters: where leaks start at the eaves

Four things to check when choosing tile-effect metal roofing

Before comparing prices for tile-effect metal roofing, check the chosen model’s installation instructions against the slope of your roof. Then compare the sheet material and coating, the size of the sheets, and the cost of the complete order including flashings and fixings. Colour is a design choice, while suitability has to be established from the technical data. For a roof with several intersecting slopes, ask for a cutting layout to see how much sheet will be left over. Review the drawings and specifications with the designer or installer before ordering.

By |2026-11-15T03:57:40+01:002022-12-14|Knowledge base|Comments Off on Four things to check when choosing tile-effect metal roofing

Planning a loft with sloping ceilings: where will you have room to stand?

The key to a comfortable attic is matching the layout to the interior heights and the way people move around, not the floor plan alone. Before choosing furniture, check the cross-section with the slopes, beams and height at the knee walls, as well as the insulation, ventilation, light and floor load capacity. Mark out zones for everyday walking, sitting and storage, allowing for the thickness of the new insulation and lining. PIR boards can help reduce the slope thickness in a suitable arrangement, but comfort depends on the whole roof and carefully executed details.

By |2026-11-14T23:55:47+01:002022-12-13|Knowledge base|Comments Off on Planning a loft with sloping ceilings: where will you have room to stand?

What goes into a complete roof and how to estimate the cost

A complete roof comprises the structure, protective layers, covering, flashings and drainage, plus insulation and airtight junctions with partitions in a heated building. When pricing, check whether the offer covers all these elements together with installation and transport, rather than comparing the material price alone. Differences in delivery scope and parameters may not be visible at first glance, so ask for an itemised breakdown of works and materials. This helps avoid a seemingly cheap order and allows cost control.

By |2026-11-14T16:50:39+01:002022-12-10|Knowledge base|Comments Off on What goes into a complete roof and how to estimate the cost

Pricing Powerroof above-rafter insulation and roof junctions

The price of Powerroof boards is only part of the cost of over-rafter insulation. Fixings, membrane, flashings and changes at roof windows must be added to the calculation. A comparison of two variants only makes sense when it covers the same works and a similar thermal effect. Recticel Powerroof is a PIR board for over-rafter thermal insulation of pitched roofs. It has an aluminium facing and a tongue-and-groove joint on all four edges. An enquiry about PIR boards should describe the over-rafter Powerroof layer installed above the timber structure of the pitched roof slope. Powerroof must be installed above the rafters while ensuring proper fixing of the entire roof covering.

By |2026-11-16T02:21:52+01:002022-12-09|Knowledge base|Comments Off on Pricing Powerroof above-rafter insulation and roof junctions
Back to top