About PiVi

This author has not yet filled in any details.
So far PiVi has created 1504 blog entries.

Daylight in a loft: gable windows, roof windows or dormers?

The choice between a gable window, a roof window and a dormer depends on room depth, orientation to the cardinal points and roof shape. Before ordering the roofing, it is worth checking whether light from one end of the attic will reach its centre, how the window will connect with the insulation and the moisture-control layer, and whether overheating protection has been planned. Furniture layout and work areas also affect how the interior is perceived. Leave the final selection to the designer, who will assess the specific rooms.

By |2026-11-14T23:58:39+01:002022-07-06|Knowledge base|Comments Off on Daylight in a loft: gable windows, roof windows or dormers?

PIR or EPS for the roof: how to compare panels in a project?

PIR and EPS are different sandwich panel cores, but the choice should not be reduced to their names. First establish the roof requirements, then compare complete panel configurations. This order shows how thickness affects flashings, how weight interacts with the structure and which properties actually determine the application. A roof sandwich panel has a core bonded to the facings and a profile suited to a specific application. It is not the same as loose insulation board laid on a ceiling. Data for standalone EPS or PIR do not automatically describe the load-bearing capacity and airtightness of a finished roof panel.

By |2026-11-14T12:54:33+01:002022-07-05|Knowledge base|Comments Off on PIR or EPS for the roof: how to compare panels in a project?

Pieces, linear metres of picket and linear metres of fence: how to calculate an order?

When buying pickets, it is easy to confuse three different quantities. The number of pieces refers to the elements, the linear metres of pickets to their total length, and the linear metres of fence to the length of the fence line. None of these values replaces the others. A reliable cost estimate must clearly show what is being calculated. This allows the quote to be checked and avoids ordering extra material due to an incorrect unit. A price per piece only makes sense when it is clear which element it covers. Two pickets of the same profile can have different lengths. Their rates should not be compared as the price of an identical product. In the schedule, each group should state the dimension and the quantity. This also applies to elements with a different coating.

By |2026-11-15T18:58:53+01:002022-07-04|Knowledge base|Comments Off on Pieces, linear metres of picket and linear metres of fence: how to calculate an order?

Comparing insulation materials for a roof

Choose roof insulation to suit the project. A new flat roof and a pitched roof being renovated offer different places for insulation. In a pitched roof there may be room between or below the rafters, or for a continuous layer over the structure. In a flat roof, consider the position of the insulation in the build-up and the pressure it must withstand. Compare declared thermal conductivity and mechanical properties in the context of the complete roof section. PIR boards, mineral wool, XPS and EPS each suit particular conditions.

By |2026-11-15T03:57:43+01:002022-07-02|Knowledge base|Comments Off on Comparing insulation materials for a roof

BauderPIR T: pricing roof geometry and the complete tapered board set

BauderPIR T are uncoated tapered boards, so the quotation must cover the entire set of wedges arising from the roof geometry, not just the area that is easy to cover. The valley carrying water towards the outlet is where the absence of the right component only becomes apparent after the actual levels have been corrected. The enquiry should therefore specify a roof with uncoated tapered boards and the expected finished result, and it is worth attaching to the quotation a falls drawing showing the direction in which the thickness increases, together with a survey covering the substrate levels and the course of the water-collecting lines. The supplier then does not have to guess the scope, and the costs of changes after the survey are fixed in advance.

By |2026-11-16T02:22:24+01:002022-06-27|Knowledge base|Comments Off on BauderPIR T: pricing roof geometry and the complete tapered board set

Titanium zinc or coated steel: what changes with the choice of sheet?

When choosing between titanium-zinc sheet and coated steel, first establish whether the criterion is appearance and architectural detail or a simple, economical covering. Check how the sheets and flashings will be joined, because titanium-zinc has a zinc base with alloying additions, while coated steel relies on a steel core. Also check the service conditions, contact with other metals and water drainage. The natural patina changes tone at different rates, so do not expect a uniform colour from the start.

By |2026-11-14T23:57:30+01:002022-06-25|Knowledge base|Comments Off on Titanium zinc or coated steel: what changes with the choice of sheet?

Steel or PVC gutters: what to check before choosing

The choice between steel and PVC gutters depends primarily on drainage capacity, not on the material alone. Before deciding, check the roof area assigned to each outlet, the roof pitch, the eaves length and the downpipe positions. In both systems, the fall, bracket spacing, expansion joints and patency are key. Steel stands out for its rigidity, while PVC offers low weight and resistance to material corrosion; plastic reacts more strongly to temperature in terms of dimensions. Leave the final layout to the designer.

By |2026-11-14T20:13:30+01:002022-06-24|Knowledge base|Comments Off on Steel or PVC gutters: what to check before choosing

Metal roof installation costs and what the labour quote should cover

What matters is not the phrase “sheet metal installation” itself, but comparing the full scope of work. Check whether the offer includes the membrane, battens, flashings, gutters and safeguards, and for a renovation also dismantling and repairs. Ask for a quote for a specific roof slope with separately described additional works and a final amount. Two offers with the same unit may describe different tasks, so list the activities first, then the price. Remember that roof geometry, substrate, access and the number of details drive the cost – a preliminary rate given by phone is no substitute for measurement and inspection.

By |2026-11-14T16:51:58+01:002022-06-20|Knowledge base|Comments Off on Metal roof installation costs and what the labour quote should cover

Clay tiles or tile-effect metal roofing for a new house?

Tile-effect metal roofing and clay tiles are best compared before the structure is approved. They differ in weight, format and the way they are worked on the roof. The price of the basic material shows only part of the expense. The choice should also be decided by the shape of the roof slopes, the details, the desired appearance and the conditions for later servicing of the covering. Steel tile-effect metal roofing is considerably lighter than many clay coverings. For example, with a tile-effect metal roofing weight of 4.7 kg/m², a covering of 160 m² weighs around 752 kg. Plain tiles weighing 1.6 kg each at a consumption of 36 pieces per m² give 57.6 kg/m², that is 9216 kg over such an area. This is a comparison of two specific examples, without battens, insulation and accessories.

By |2026-11-14T10:33:05+01:002022-06-16|Knowledge base|Comments Off on Clay tiles or tile-effect metal roofing for a new house?

When should sigma sections be included in structural quotations?

If the design permits several solutions, it is worth comparing more than just the prices of similar C-sections. Sigma profiles can be a separate variant of the layout. Additional web bends allow their properties to be shaped. In the right application this is a useful feature. However, the assessment should cover the entire structure. Cold-formed profiles are selected for a specific task, so a favourable quotation must show more than just the mass of steel per metre. First, the function of the element and the requirements must be stated. This may be a purlin, a rail or another part of the system specified in the documentation. Loads, spans and support conditions are needed. Only such a description allows a suitable sigma profile to be selected. It makes no sense to compare random sections that merely have a similar height.

By |2026-11-15T18:56:25+01:002022-06-15|Knowledge base|Comments Off on When should sigma sections be included in structural quotations?
Back to top