About PiVi

This author has not yet filled in any details.
So far PiVi has created 1404 blog entries.

How much funding is available in Poland to remove asbestos roofing?

No single subsidy amount is available to every owner of an asbestos roof, because the conditions depend on the programme and the local call. First check the rules at your municipality: what is funded, whether the aid covers dismantling, collection, transport and disposal of the waste, or only the collection of prepared material. Also establish your own contribution and ineligible costs, including the purchase of new metal roof tiles. The 2026 national call listed those works, but it was addressed to voivodeship funds with municipal participation; it was not a nationwide grant for a new roof.

By |2026-11-14T20:11:15+01:002026-11-01|Knowledge base|Comments Off on How much funding is available in Poland to remove asbestos roofing?

What changed in Polish building law in 2026?

In Poland, most provisions of the amendment simplifying the building process took effect on 7 January 2026, but they do not exempt you from verifying the design. Before buying roofing, sandwich panels and insulation, check whether the planned works fall within the expanded catalogue of investments covered by simpler procedures. It is essential to determine the type of building and its parameters, not its resemblance to a photo from the internet. Remember that an exemption from a permit does not release you from ensuring safety and meeting technical requirements. The designer should confirm the scope of documentation and the appropriate conditions for the roof and partitions.

By |2026-11-14T16:50:54+01:002026-11-01|Knowledge base|Comments Off on What changed in Polish building law in 2026?

What paperwork is needed before building a house in Poland?

In Poland, before building a house, you must establish whether the plot can be built on at all and choose the correct formal procedure. Check the right to dispose of the property for construction purposes, road access, utilities and the local plan — especially the building function and roof geometry. Where no plan applies, determine the route to obtaining planning conditions. Do not rely on floor area alone or on neighbouring houses; the designer defines the area of impact. It is worth linking the documentation and roof covering choice to the approved design before ordering material.

By |2026-11-14T16:51:09+01:002026-11-01|Knowledge base|Comments Off on What paperwork is needed before building a house in Poland?

Where T35 trapezoidal steel sheet works well and what it costs

T35 is a family of trapezoidal sheets with a profile of around 35 mm, combining low weight with favourable section stiffness. Before buying, however, it is worth checking not the symbol alone but the specific variant: covering width, pitch, edges and thickness range, as well as conformity with the structural design. Price depends on thickness, coating and covering area, so a comparison with T18 or the design solution may be more reliable than a generic recommendation. Leave the final selection to the designer, who will assess loads, support spacing and service conditions.

By |2026-11-14T16:51:44+01:002026-10-30|Knowledge base|Comments Off on Where T35 trapezoidal steel sheet works well and what it costs

What affects the price of T18 and T35 trapezoidal steel sheets?

The price of T18 and T35 trapezoidal sheet depends primarily on steel thickness, coating type, profile and the unit of settlement — prices per gross and effective square metre are not the same. Before comparing offers, check whether the quoted rate refers to effective area and what share of the chosen sheet is taken by the side lap. It is also worth establishing whether flashings, cut-offs and transport are included. Examples from the price list of 28 October 2026 show differences between variants, but do not replace a quote for a specific order.

By |2026-11-14T16:50:40+01:002026-10-29|Knowledge base|Comments Off on What affects the price of T18 and T35 trapezoidal steel sheets?

When is standing seam roofing a good fit for a building?

Choose a standing seam roof if you want a calm, vertical pattern across the slope, but first check whether your structure and contractor can support it. The key decision is the system: a traditionally closed seam or a ready-made snap-on panel, because a similar appearance does not mean identical tightness or behaviour under temperature changes. Before ordering, compare the complete roof with T35 or a modular metal tile, including the substrate, fixing and details. Remember that lightweight sheet metal does not prove the old roof truss is in good condition.

By |2026-11-15T03:57:36+01:002026-10-28|Knowledge base|Comments Off on When is standing seam roofing a good fit for a building?

How much do tile-effect roofing sheets cost, and how do you budget for the whole roof?

To estimate the cost of a tile-effect metal roof, start with a cutting plan and work out how much sheet metal to order. Two quotations for the same roofing can look different if one supplier includes the overlaps in the sheet area and another charges for the area actually covered. For modular sheets, work out the number of whole panels as well. Compare coating options on the same price basis and check whether VAT is included. Add separate amounts for flashings, fixings, delivery and labour to arrive at the cost of the finished roof.

By |2026-11-14T20:14:45+01:002026-10-28|Knowledge base|Comments Off on How much do tile-effect roofing sheets cost, and how do you budget for the whole roof?

Does vacuuming the gutters restore drainage before winter?

Vacuuming can remove leaves and loose debris from a gutter. Whether rainwater can drain away before winter also depends on the outlets, bends, downpipes and gullies. Check the gutter fall, joints and brackets. Water left standing after cleaning warrants a closer look. A suitable nozzle can pick up dry leaves and small twigs where it can reach them. The shape of the gutter and the material stuck inside affect how well the nozzle works. Use a safe working position and protect the surface coating during cleaning.

By |2026-11-15T03:57:53+01:002026-10-24|Knowledge base|Comments Off on Does vacuuming the gutters restore drainage before winter?

How zinc-magnesium coatings protect steel roofing sheets

When choosing roof sheeting, the key is to establish whether the zinc-magnesium coating is part of a complete, well-matched system rather than the sole argument. It is worth checking where this layer sits within the sheet, what role magnesium and aluminium play, and whether cut edges can be better protected. The organic finish, workmanship and service conditions must be assessed separately. The technology name alone does not guarantee durability in every environment, so before buying, compare the parameters of the whole variant, not just the marketing slogan.

By |2026-11-15T03:58:24+01:002026-10-23|Knowledge base|Comments Off on How zinc-magnesium coatings protect steel roofing sheets

How to read a roof pitch shown in degrees or per cent

Before choosing a covering, establish whether the stated pitch is in degrees or percent — these units are not interchangeable. Check that the value applies to the specific roof slope and accounts for joints and roof penetrations. Percent describes the rise relative to horizontal distance, not the length measured along the slope. For T18 and T35 sheets and roof panels, instructions may use different units, so before requesting a quote, state the angle or pitch with its unit, the slope length and the planned details.

By |2026-11-15T03:56:31+01:002026-10-23|Knowledge base|Comments Off on How to read a roof pitch shown in degrees or per cent
Back to top