+48 500 409 109

A hipped roof: how the structure affects the cost

A hipped roof has four slopes joined at the corners, and its cost depends on geometry and construction details. In a hip roof on a rectangular building, two slopes are close to a trapezium and two to a triangle, with a ridge at the top; in a pavilion roof the slopes meet at a point. Before choosing, check that the design defines the supports and how loads are transferred, because the number of slopes does not describe the load-bearing structure. Consider the span, pitch, length of the corners and the layout of the rooms under the roof.

By |2026-11-14T23:57:01+01:002023-03-26|Knowledge base|Comments Off on A hipped roof: how the structure affects the cost
Read More

Stone-coated or painted steel roof tiles: what does the finish change?

The choice between a granular-coated metal roof tile and a coated finish depends on the desired appearance and verified documentation, not on a slogan about a better covering. It is worth checking whether the sample matches the effect on a large roof area, and comparing the coating build-up and installation requirements. The granular finish gives a mineral texture and diffuses light, but does not replace insulation or snow guards. A coated finish allows various gloss levels and profiles. The decision should be based on a complete system for the same roof geometry.

By |2026-11-14T20:15:01+01:002023-03-14|Knowledge base|Comments Off on Stone-coated or painted steel roof tiles: what does the finish change?
Read More

Comparing the weight of roof coverings: what belongs in the calculation?

Thin metal sheet coverings are among the lightest roofing options, but compare the mass of the whole system rather than the sheet alone. Check whether the data in the product sheet refer to a square metre of total area, effective coverage or a single sheet, as these are different units. Convert both coverings to kilograms per square metre of effective coverage and add ridges, flashings and accessories separately. Remember that profiling changes stiffness and the amount of material per roof area, and the load table must match the ordered variant. Leave the final selection decision to the designer.

By |2026-11-14T23:57:32+01:002023-03-03|Knowledge base|Comments Off on Comparing the weight of roof coverings: what belongs in the calculation?
Read More

Matt or gloss coating for tile-effect metal roofing?

Choosing between matt and glossy metal roof tiles is not a simple matter of better versus worse — the type of coating, its properties and its intended use are what count. Before judging appearance, check corrosion and UV resistance, the metallic layer protecting the steel, and maintenance requirements. Compare specific data, not just the two finish names. View the colour outdoors, on several joined sheets, in sun and shade. Remember that durability also depends on the environment, installation and maintenance, and matching the look to the house makes sense only once the material meets the roof's technical requirements.

By |2026-11-14T16:51:48+01:002023-01-23|Knowledge base|Comments Off on Matt or gloss coating for tile-effect metal roofing?
Read More

What changes when you choose trapezoidal steel sheet instead of tile-effect metal roofing on a new house?

Trapezoidal steel sheet can suit a house just as well as tile-effect metal roofing if the design accounts for it. The difference does not end with appearance. Both coverings have different geometry, support and details. It is worth comparing them before installing battens and flashings. A later change may require more work than the difference in sheet price suggests. Trapezoidal sheet forms continuous lines running in the direction of the roof slope. Tile-effect metal roofing adds a transverse division that resembles rows of tiles. Flat modular versions give yet another effect than traditional waves. It is therefore worth comparing specific profiles rather than two general material names.

By |2026-11-14T10:36:53+01:002022-12-26|Knowledge base|Comments Off on What changes when you choose trapezoidal steel sheet instead of tile-effect metal roofing on a new house?
Read More

Four things to check when choosing tile-effect metal roofing

Before comparing prices for tile-effect metal roofing, check the chosen model’s installation instructions against the slope of your roof. Then compare the sheet material and coating, the size of the sheets, and the cost of the complete order including flashings and fixings. Colour is a design choice, while suitability has to be established from the technical data. For a roof with several intersecting slopes, ask for a cutting layout to see how much sheet will be left over. Review the drawings and specifications with the designer or installer before ordering.

By |2026-11-15T03:57:40+01:002022-12-14|Knowledge base|Comments Off on Four things to check when choosing tile-effect metal roofing
Read More

What goes into a complete roof and how to estimate the cost

A complete roof comprises the structure, protective layers, covering, flashings and drainage, plus insulation and airtight junctions with partitions in a heated building. When pricing, check whether the offer covers all these elements together with installation and transport, rather than comparing the material price alone. Differences in delivery scope and parameters may not be visible at first glance, so ask for an itemised breakdown of works and materials. This helps avoid a seemingly cheap order and allows cost control.

By |2026-11-14T16:50:39+01:002022-12-10|Knowledge base|Comments Off on What goes into a complete roof and how to estimate the cost
Read More

Metal shingle roofing or tile-effect sheets: how do they differ?

Shingle-effect metal roofing uses profiled steel to reproduce the pattern of overlapping timber shingles. It is available with a coated or stone-coated finish. To choose a system, check the data sheet and fitting instructions for the particular profile. The name alone tells you little about steel thickness, effective cover width or how the joints keep out rain. Check the permitted pitch, batten spacing and support at the eaves, and leave room for flashings around roof windows and chimneys. Compare those details alongside the appearance when choosing between shingle-effect and tile-effect sheets.

By |2026-11-15T00:02:07+01:002022-11-13|Knowledge base|Comments Off on Metal shingle roofing or tile-effect sheets: how do they differ?
Read More

What determines the service life of tile-effect metal roofing?

The durability of a metal roof tile depends above all on matching the coating and core thickness to the conditions on the roof, and on correct installation of the entire covering. Rather than looking for one universal number of years, it is worth checking the specific product: the type of metallic and organic coating, its suitability for the given environment, and maintenance requirements. Edges, fasteners, ventilation beneath the covering and the condition of flashings also matter. The number of warranty years is not the same as expected service life. A roof near a forest, industrial plant or coast operates in a different environment from one in quiet, open housing.

By |2026-11-14T16:51:29+01:002022-09-08|Knowledge base|Comments Off on What determines the service life of tile-effect metal roofing?
Read More

Laying modular tile-effect roofing from the eaves to the cuts at a roof valley

Before ordering the battens, establish the exact model and variant of the modular metal roof tile, as this determines the batten spacing and fixing method. Check the instructions for the permitted pitch, sheet geometry, laying sequence and connection rules. A similar appearance of two modules does not guarantee identical installation, especially at ends and corners. The documentation should be on site before the support is built. Choose the specific roofing variant and only then plan the work, to avoid corrections and uncertainty at every joint.

By |2026-11-15T03:58:12+01:002022-08-22|Knowledge base|Comments Off on Laying modular tile-effect roofing from the eaves to the cuts at a roof valley
Read More
Back to top