+48 500 409 109

PVC or metal soffits: choosing an eaves finish and estimating its cost

When choosing soffit, first decide whether the priority is the lightness and flexibility of PVC or a colour match between coated steel and the roof tiles and flashings. Check whether the product's conditions of use cover dark colours and sun exposure, and examine the rigidity of a sample and the availability of ventilated components. Remember that the air inlet must match the roof layer build-up, and the openings must not be covered with airtight foil. Calculate cost with trims, corners, framework and installation, not just square metres of panel.

By |2026-11-14T23:58:23+01:002025-05-10|Knowledge base|Comments Off on PVC or metal soffits: choosing an eaves finish and estimating its cost
Read More

What determines the cost of a tile-effect metal roof?

The price of tile-effect metal roofing depends on the material, coating, format and the quantity needed for a specific roof. Two rates per metre may refer to different areas. With modules, pricing is per piece. Before you compare quotes, convert them to the same unit and add the elements without which a complete covering cannot be made. A quote may show a total square metre, an effective square metre or the price of one module. The effective area describes the coverage after the elements are joined. The total area also includes the parts that go into the laps. You should not multiply the price per total square metre by the roof slope area without checking the layout.

By |2026-11-14T10:36:38+01:002025-05-03|Knowledge base|Comments Off on What determines the cost of a tile-effect metal roof?
Read More

What to buy together with metal fence pickets? A complete order checklist

When choosing a fence, most attention goes to the profile and colour. Then it turns out that small but essential components are missing for installation. Metal fence pickets should be ordered together with a clearly defined scope of accessories. This does not mean buying everything blindly. Each item should follow from the chosen system, construction and number of elements. Determine whether the price covers just the pickets or also the crossbars and fence posts. If the structure already exists, its material and dimensions need to be described. If it is yet to be built, it should be matched to the planned layout. Sheet metal pickets do not replace supports or their correct setting.

By |2026-11-15T18:58:58+01:002025-04-20|Knowledge base|Comments Off on What to buy together with metal fence pickets? A complete order checklist
Read More

Does a larger photovoltaic roof capacity always mean a better investment?

A larger active area can increase production, but it does not necessarily increase the benefits proportionally. An additional roof section is often less well lit or supplies energy at a time when there are already large surpluses. The additional cost must be compared with the additional value of the energy. In an integrated system, a consistent covering can be maintained with passive elements. There is therefore no obligation to use every square metre of the roof surface to the maximum. At the outset, areas with good conditions and a simple layout are usually considered. As capacity is increased, zones with shading, a less favourable orientation or a more difficult detail may be added. Their production per unit of capacity does not have to be the same as on the first part of the roof.

By |2026-11-15T19:00:10+01:002025-04-18|Knowledge base|Comments Off on Does a larger photovoltaic roof capacity always mean a better investment?
Read More

Picket length list: how to prepare an order without mistakes?

Pickets cut to a fixed dimension make it easier to build a straight fence. The prerequisite is a correct length list. An error in the schedule can be repeated across the entire batch, even if production is accurate. It is therefore worth separating the concept sketch from the document sent for execution. Simple order in numbers, units and versions matters more here than a complicated program. Start with a site plan showing the gate and the wicket gate. Give each field a clear designation. Determine from which side the elements are counted. Numbering from the left without indicating the observation side can end up reversed. It is worth using a fixed reference point, for example a specific corner. Also mark the street side on the sketch. This makes it easier for someone who was not present during the measurement to read the order of elements correctly.

By |2026-11-15T18:58:55+01:002025-04-03|Knowledge base|Comments Off on Picket length list: how to prepare an order without mistakes?
Read More

When should wall panels be laid horizontally and when vertically?

The direction in which the panels are laid affects the appearance of the façade, but also the supports, the joints and the installation sequence. In a new building it is worth considering both variants together with the windows and doors. Not every system has an identical scope of application in both directions. The decision should therefore be based on the specific panel and the wall layout. Many wall panels can be used horizontally and vertically, but the conditions need not be the same. The differences may concern load-bearing capacity, termination details and fire resistance. Where EI is required, the scope for the planned direction must be verified, and not merely the class given in the heading of the data sheet.

By |2026-11-14T12:54:04+01:002025-03-25|Knowledge base|Comments Off on When should wall panels be laid horizontally and when vertically?
Read More

How much does a square metre of sandwich panel cost and what are you really buying?

The price per square metre of a sandwich panel describes a specific product and a method of calculation. It does not yet tell you how much you will pay for the complete set of components or for the finished wall. To assess an offer, you need to combine the rate with dimensions, quality and scope of delivery. A simple calculation allows you to compare the cost per unit, per order and for the enclosure after installation. Ask whether the calculation is based on cover width, overall width or another rule stated in the offer. The cover width defines the module repeated after correct connection of the elements. The part forming the joint does not provide a separate strip of finished wall. Do not count it again as usable area.

By |2026-11-14T12:54:38+01:002025-03-21|Knowledge base|Comments Off on How much does a square metre of sandwich panel cost and what are you really buying?
Read More

Ordering a prefabricated steel frame for an operating site

Prefabricated components can shorten the route from choosing a solution to delivery on site. For a steel hall to be built efficiently, however, the facility must be ready to receive them. Agreed dimensions, checked site conditions and a defined scope of works are needed. Our standard steel structures can be ordered from available batches. The availability of a specific variant and the collection date are confirmed at the time of order. Our duo-pitch structures cover widths of 8, 10, 12, 14, 16, 18 and 20 m. These are specific series that are worth comparing with the layout of bays or storage areas. A steel hall for warehousing needs space for racking and aisles. In production, access to machinery and the flow of material between process stages are also important.

By |2026-11-15T03:58:57+01:002025-03-05|Knowledge base|Comments Off on Ordering a prefabricated steel frame for an operating site
Read More

How to choose the right type of sandwich panel for the function and budget of a new building?

A sandwich panel combines metal facings with a core, but its suitability is determined by the whole product and how it is used. For a new building, selection should start from the function of the rooms, through the requirements of the building elements, to dimensions and cost. This approach allows real solutions to be compared rather than choosing solely by the name of the core. A dry warehouse, workshop, office back-up area and cold store may sit under one roof but place different demands. Note the temperature, humidity, cleaning method and planned equipment. Also identify areas requiring protection against impacts or frequent traffic. This is the starting point for selecting walls and roof.

By |2026-11-14T12:53:15+01:002024-11-23|Knowledge base|Comments Off on How to choose the right type of sandwich panel for the function and budget of a new building?
Read More

First grade or outlet: which panel makes sense for a new building envelope?

The choice between first grade and outlet depends on the function of the partition, the type of deviations and batch matching. A low price does not clarify whether the defect is aesthetic or affects the joint and the panel's performance. First define the project requirements, then calculate the saving taking into account the cutting layout, accessories and the number of usable pieces. A partition separating zones with a required fire resistance has different criteria from the cladding of a small unheated warehouse. Likewise, a frontage at the entrance requires a different assessment of appearance from a surface not visible from outside. List the technical and aesthetic requirements separately. Do not weaken the former in order to match the project to a cheaper batch.

By |2026-11-14T12:53:08+01:002024-07-03|Knowledge base|Comments Off on First grade or outlet: which panel makes sense for a new building envelope?
Read More
Back to top