Knowledge base2026-11-15T18:56:00+01:00

Choose a product group

Metal roofing

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Knowledge base

Izoprofil.com helps you compare materials for a specific building project. The guides cover the uses of sandwich panels, PIR insulation boards, metal roof tiles and trapezoidal sheets. The criteria depend on the application, including the supporting structure, thermal performance and requirements for the finished surface. Read the product specifications, identify which dimensions affect the order and compare complete solutions. The articles help you discuss the options with a designer or installer and check the suitability of the selected materials before purchase.

Buying fence pickets in stages: how to keep your fence consistent?

Not every fence is built all at once. Sometimes the front is done first, and the sides of the plot later. This split can suit the budget and the work schedule. However, you need to plan how to keep the material consistent. Metal fence pickets from a later delivery may differ in profile availability or coating appearance. It is therefore worth planning the staging before the first order. Mark which sections will be built in the first stage and where the boundaries of the later ones will fall. It is good if the split follows the fence posts, corners or the gate. This makes measuring and quantity control easier. Do not order a random portion of material without assigning it to a specific location.

Does a larger photovoltaic roof capacity always mean a better investment?

A larger active area can increase production, but it does not necessarily increase the benefits proportionally. An additional roof section is often less well lit or supplies energy at a time when there are already large surpluses. The additional cost must be compared with the additional value of the energy. In an integrated system, a consistent covering can be maintained with passive elements. There is therefore no obligation to use every square metre of the roof surface to the maximum. At the outset, areas with good conditions and a simple layout are usually considered. As capacity is increased, zones with shading, a less favourable orientation or a more difficult detail may be added. Their production per unit of capacity does not have to be the same as on the first part of the roof.

How to choose the roof panel thickness for the way the garage is used?

A car garage, a heated workshop and a room connected to the house do not need an identical roof. Before choosing the panel thickness, you need to establish the temperature, the support arrangement and the amount of moisture introduced during use. This allows the insulation, ventilation and structure to be selected as a coordinated whole. In a cold garage, insulation can limit sudden temperature changes, but it does not heat the interior by itself. In a workshop used daily, heat loss and comfort during longer stays matter. Different conditions will occur with occasional heating for a few hours. It is worth defining this scenario instead of choosing a panel based on the general term “garage”.

Planning a mezzanine floor in a steel building

The free space above the floor of a steel hall invites the idea of adding a mezzanine. An additional level can accommodate back-of-house areas, workstations or part of the warehouse. However, it is not an ordinary shelving unit that can simply be placed in an empty space. It changes loads, people movement and the building's conditions of use. Its suitability is determined by the entire system, from the foundation to the exit route. Determine what will be located on the mezzanine. An office, an archive and material stock require different assumptions regarding loads and organisation. In a steel hall, it is also important how items will reach the new level. Stairs alone may not solve the transport of heavy or large loads.

Picket length list: how to prepare an order without mistakes?

Pickets cut to a fixed dimension make it easier to build a straight fence. The prerequisite is a correct length list. An error in the schedule can be repeated across the entire batch, even if production is accurate. It is therefore worth separating the concept sketch from the document sent for execution. Simple order in numbers, units and versions matters more here than a complicated program. Start with a site plan showing the gate and the wicket gate. Give each field a clear designation. Determine from which side the elements are counted. Numbering from the left without indicating the observation side can end up reversed. It is worth using a fixed reference point, for example a specific corner. Also mark the street side on the sketch. This makes it easier for someone who was not present during the measurement to read the order of elements correctly.

When should wall panels be laid horizontally and when vertically?

The direction in which the panels are laid affects the appearance of the façade, but also the supports, the joints and the installation sequence. In a new building it is worth considering both variants together with the windows and doors. Not every system has an identical scope of application in both directions. The decision should therefore be based on the specific panel and the wall layout. Many wall panels can be used horizontally and vertically, but the conditions need not be the same. The differences may concern load-bearing capacity, termination details and fire resistance. Where EI is required, the scope for the planned direction must be verified, and not merely the class given in the heading of the data sheet.

Back to top