Knowledge base2026-11-15T18:56:00+01:00

Choose a product group

Metal roofing

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Knowledge base

Izoprofil.com helps you compare materials for a specific building project. The guides cover the uses of sandwich panels, PIR insulation boards, metal roof tiles and trapezoidal sheets. The criteria depend on the application, including the supporting structure, thermal performance and requirements for the finished surface. Read the product specifications, identify which dimensions affect the order and compare complete solutions. The articles help you discuss the options with a designer or installer and check the suitability of the selected materials before purchase.

How to assess a roofer before awarding the contract

The quality of a roofer is shown above all by the way they approach preparation and execution. Rather than relying solely on price or years in business, check whether their experience matches your task – a small canopy and a complex house roof require partly different skills. It is also worth noting whether the conversation covers the entire layer build-up, not just the colour of the covering. A professional should identify the points that need to be agreed with the designer and explain what data is needed for a reliable quote.

Which information in reviews helps you choose a materials supplier?

Reviews can indicate what contact and order fulfilment are like. However, they do not replace checking the material parameters or the scope of the quote. When buying trapezoidal steel sheet, sandwich panels or hall components, it is worth looking for descriptions similar to your own build. Specific information about a resolved problem gives more than general satisfaction alone. First check what the purchase concerned. Delivery of a few short sheets does not show the whole organisation of ordering long panels for a hall. Material selection has a different significance, as does its transport, and yet another is the execution of the structure. If an entry does not distinguish these scopes, it is difficult to relate the review to your own needs.

Preventing corrosion on a metal roof and spotting when repairs are needed

Before ordering the sheeting, establish the environment the roof will face — the coating should be chosen on that basis, not on colour alone. Check which protective layers the sheet has and whether their intended use suits conditions by the sea, at an industrial site or inside a farm building. During installation, watch the edges, swarf and fixings, since corrosion most often starts there. A single rusty spot does not necessarily mean the steel is damaged, so before any repair it is worth identifying the source and extent of the change.

What determines batten spacing under T18 and T35 roof sheets?

No single batten spacing suits every T18 and T35 sheet. The load capacity depends on the specific product, steel thickness and the loads acting on the roof. Support width, the number of spans and screw placement also matter. Battens transfer loads to the rafters, while counter-battens provide the ventilation gap. The profile name identifies a family, but individual products may differ in geometry and cover width. The project should therefore be checked against the manufacturer's tables.

Comparing two mineral wool panel ranges that look alike

The names of the panel lines suggest different levels of performance, but they do not replace a technical comparison. Two similarly looking mineral wool panels may have a different core construction, joint or fire resistance range. In a new wall, what matters is which need a given variant addresses and what changes it forces in the rest of the building envelope. Before comparing, ask for a full description of both configurations. The difference may lie in the density or type of mineral wool, the facings, additional sealing, the fixing method or the scope of classification. The term “reinforced” alone does not say which parameter has been changed.

How do you choose the colour of steel sheet for the roof, façade and surroundings?

The colour of the steel sheet is best chosen together with the façade, windows and drainage. The RAL designation helps to describe the colour, but it does not say everything about the appearance of the finished surface. Gloss, texture, light and the shape of the trapezoidal steel sheet matter. Before ordering, it is worth viewing a real sample in the place where the roof or wall will be created. First establish the largest surfaces of the building. On a house with a sprawling roof, the covering can strongly influence the perception of the whole form. In a simple hall, the façade may play a greater role. Choose the dominant colour, and only then match the flashings, gate, gutters and small accents. Too many similar but different greys can look accidental.

Back to top