EFYOS BLUE SMART A: what to include in a tapered insulation quotation

The selection of EFYOS BLUE SMART A starts with the falls plan, not with the area of the roof slopes. A flat roof with point drainage requires tapered boards matched to the outlet invert level and to the end heights of the individual fields; any shortfall only becomes apparent at the drainage channel. The quotation should cover the complete set of components and the way successive batches are delivered, because the price is driven by geometry and organisation, not by a single standard board. Attach to the enquiry a plan with the tapered boards marked and a description of the intended result.

By |2026-11-16T02:22:05+01:002021-06-01|Knowledge base|Comments Off on EFYOS BLUE SMART A: what to include in a tapered insulation quotation

A termPIR ETX quotation: the board and the complete insulation system

Comparing the price of termPIR ETX alone with the price of a complete façade leads to a misleading result. Adhesives, fixings, mesh, profiles and render are added to the quotation. You also need to know the condition of the wall and the scope of work around openings before the final cost can be assessed. termPIR ETX is a PIR board with a vapour-permeable glass fleece facing. The manufacturer intends it for two-layer walls in the ETICS system. An enquiry about PIR boards should describe the façade where the limited width of the reveal makes it difficult to use thick insulation. The thermal insulation at the window frame must remain continuous with the boards laid on the full wall.

By |2026-11-16T02:21:20+01:002021-04-23|Knowledge base|Comments Off on A termPIR ETX quotation: the board and the complete insulation system

Buying Thermano Compact: when a smaller format reduces installation costs

A smaller board does not have to mean a lower price per square metre, but it can reduce waste and working time on details. This is how Thermano Compact should be assessed. The calculation should cover the actual cutting layout as well as the cost of delivery and handling of the material at the specific location. Thermano Compact is a PIR board in the 600 × 1200 mm format, with a multi-layer facing containing aluminium. The smaller format is an important practical feature. An enquiry about PIR boards should describe a small working area into which a 600 × 1200 mm board is easier to bring. The Thermano Compact format must be matched to the size of the working area and the available transport route.

By |2026-11-16T02:21:36+01:002021-04-17|Knowledge base|Comments Off on Buying Thermano Compact: when a smaller format reduces installation costs

Corrugated fibre cement in architecture. A simple material with a clear rhythm

A corrugated roof has a clear rhythm that is visible even from a distance. Corrugated fibre cement sheets allow this rhythm to be used in simple, orderly architecture. Asbestos-free fibre cement does not have to be associated only with utility buildings. The effect is determined by the proportions of the building volume, the division of the sheets and the way the edges are finished. The repeating profile lays bands of light and shadow across the surface. When viewed from the side, these can be more pronounced than when seen straight on. The height and pitch of the corrugation matter. It is not worth choosing a profile solely from a small colour sample, because across a large roof area its rhythm becomes an important part of the building. In a simple volume, such a material can be the main means of expression.

By |2026-11-15T18:59:29+01:002021-04-14|Knowledge base|Comments Off on Corrugated fibre cement in architecture. A simple material with a clear rhythm

PIR, cellulose or wood fibre: comparing the cost of finished insulation

The price of the material in a pack is not enough to compare different technologies. PIR boards, cellulose and wood fibre require different preparation and installation methods. The purchase should be assessed for a similar thermal effect, taking into account space, summer comfort and the full scope of work. PIR boards are rigid products with a defined thickness and facing. Cellulose can be blown into prepared cavities. A quote for blowing in may include installing the layer, while a PIR quote may cover only the material. A comparison requires adding the scope of labour and preparation to both variants. Record the scope of each quote in stages: preparing the space, delivery and installation of the layer. This will allow you to distinguish the price of the product from the price of the completed service.

By |2026-11-16T02:30:02+01:002021-04-02|Knowledge base|Comments Off on PIR, cellulose or wood fibre: comparing the cost of finished insulation

XPS price per m², m³ and pack. How to compare offers?

The XPS price may be given per pack, per square metre or per cubic metre. Without converting, it is easy to mistake a more expensive offer for a cheaper one or to order too little material. Extruded polystyrene is worth comparing at the same thickness and with the same properties. The colloquial term Styrodur does not specify the grade. A good offer contains data that allow you to calculate the quantity and check whether the boards are suitable for the project. Two packs of XPS may look similar yet differ in thickness, number of boards and parameters. A price without this information says little. Thermal, mechanical and moisture-related properties as well as edge geometry must be compared. Only then does converting units make sense.

By |2026-11-15T18:59:40+01:002021-03-28|Knowledge base|Comments Off on XPS price per m², m³ and pack. How to compare offers?

Buying Recticel Powerdeck F. How do you calculate the cost of the bonded variant?

With Powerdeck F, it is worth pricing the material and the joint execution separately. Adhesive consumption, substrate preparation and roofing details all affect the cost. A quote based only on the board area does not show the full difference between the bonded system and another fixing variant. Recticel Powerdeck F has a PIR core faced on both sides with mineralised glass fleece. The product is intended for flat roofs with a suitably selected covering. When enquiring about PIR boards, describe the mineralised glass fleece of Powerdeck F as the surface that works with the covering. The Powerdeck F facing must be matched to the materials it comes into contact with in the adopted roof build-up.

By |2026-11-16T02:21:53+01:002021-02-21|Knowledge base|Comments Off on Buying Recticel Powerdeck F. How do you calculate the cost of the bonded variant?

Corrugated fibre cement roofs and façades: achieving a coherent design through detailing

Repeating the corrugated material on the roof and the wall can bring order to the building form. Corrugated fibre cement sheets allow this effect if the given product has the appropriate intended use. Asbestos-free fibre cement does not, however, mean identical installation on both surfaces. Visual consistency must be combined with different water paths, support and ventilation. The roof drains precipitation over a sloping surface, while the façade shields the wall from external conditions. In a ventilated system there is a designed cavity behind the cladding. Both parts may look similar, yet need not use identical laps and fixings. Before deciding, the application of the specific sheet must be confirmed. The documentation should cover the planned method of use.

By |2026-11-15T19:00:43+01:002021-01-30|Knowledge base|Comments Off on Corrugated fibre cement roofs and façades: achieving a coherent design through detailing

Corrugated fibre cement sheets on a ventilated façade. What does vertical installation change?

Corrugated cladding can give a façade a clear rhythm. However, fibre cement sheets used on a wall require a system intended for that purpose. Asbestos-free fibre cement on a roof and on a façade performs a similar protective function, but works in a different arrangement. Vertical installation must be assessed from the substructure through to the detail at the plinth. Not every sheet of the same material has the same application. The documentation must be checked to see whether the selected profile can form the planned cladding. A flat sheet, a corrugated roof sheet and another façade panel are not automatically interchangeable. They differ in geometry and installation requirements. If the manufacturer permits use on a wall, the correct instructions for that solution are needed.

By |2026-11-15T19:00:45+01:002021-01-09|Knowledge base|Comments Off on Corrugated fibre cement sheets on a ventilated façade. What does vertical installation change?
Back to top