Choose a material

Roofing sheets

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

Costs of new construction

Buying sandwich panels in 2026: seven decisions that affect the final bill

In brief

Savings on sandwich panels start with project coordination. The price per metre is one element, alongside cutting patterns, partition requirements and installation method. Seven decisions made before ordering allow equivalent variants to be compared and limit expenses that usually appear only after purchasing the material. Separate the wall area from the area of purchased panels. The covering module, openings and shape of the last field determine the number of elements. An allowance adopted without a drawing may be too small on a complex façade or unnecessarily large in a regular layout. List lengths and quantities instead of rounding the square metreage alone.

New hall façade with a window band, gate and corner showing various cladding details.

1. Calculate the covering area and actual cutting pattern

For example, 16 panels with a 1.15 m module and a length of 3.8 m give 69.92 m² of purchase. Check how much of this area the design will use. Offcuts should not reduce the budget in advance until you indicate a specific place and correct fixing for them.

2. Match the insulation to the zones that arise

Not every part of a hall has the same temperature. An office, workshop and cold storage area should be described as separate zones, and their boundaries planned on the drawing. The building envelope can then be selected to suit the function. Random use of one thickness everywhere can increase the cost or leave a weak point next to a heated room.

Assess entire walls and the roof, together with the base and the openings. A better panel parameter will not compensate for a leaky gate. Paying extra for insulation makes sense when comparing variants that meet the requirements and with a clear assumption of future use.

3. Establish fire requirements before comparing cores

Reaction to fire describes a different phenomenon from fire resistance EI or REI. One piece of information must not be replaced by the other. The choice of core should take the building requirements into account, but the final assessment refers to the classified solution with its fixing method, supports and dimensions.

A late change in requirements may force a different panel, a greater load on the structure and a new detail. Therefore agree them before ordering the steel and the panels. A cheap variant that has to be replaced later does not deliver savings even when its initial price was attractive.

4. Compare the panel together with the structure

The thickness of the facings and the core parameters influence the possible application for a given support arrangement. Sometimes a higher-priced panel variant allows a different substructure grid to be considered, but this requires calculations. Do not assume such an effect on the basis of thickness alone. Check the full set of loads and the table conditions.

In the budget, include the cladding material, steel, fasteners and labour. Changing the purlin spacing also affects the openings and the lengths of components. Only the sum of these items shows which proven variant is more favourable for the new building.

Insulated Sandwich Panels – explore the SteelProfil range

5. Choose the coating and colour before the lengths

The environment on both sides of the building envelope determines the requirements for the coating. Washing, moisture or aggressive exposure may require different facings than a dry warehouse. The RAL code does not define corrosion resistance. Do not compare colour alone while ignoring the type and scope of the protective treatment.

A dark facing changes the heating conditions. This may affect the permissible length and the structural arrangement, and therefore also the number of joints. A colour chosen only after the structure has been approved can force a redesign. Agree the appearance and the envelope parameters at the same time.

6. Limit unnecessary openings and non-standard details

Every penetration requires support, a flashing and a sealed connection of the layers. Coordinate the layout of windows, doors and services with the panel module. Shifting a planned opening by a small distance can simplify the cutting plan, provided it retains its function and the requirements of the other trades.

Do not remove a necessary skylight solely for cheaper cladding without assessing the use of the hall. Compare its effect on lighting, services and the roof as a whole. Look for reducing incidental details, not mechanically decreasing the number of all elements.

7. Match the format to the method of execution

A very long panel can reduce the number of laps but requires suitable lifting and space. Shorter elements may fit more easily on site but create additional joints. Compare both variants with the crew before purchase, taking into account equipment, access and the sequence of closing the building.

In the cost estimate, separate the installation rate from the one-off mobilisation and equipment. With a contractual additional equipment cost of €648.06 spread over 400 m², €1.62/m² is added. This is an arithmetic net example, not a market price. It shows why the organisation may change a seemingly favourable rate for the panels.

Questions and answers

Is negotiating the price per square metre enough?

No. First compare the quantity of material actually needed, the requirements and the full scope. A small discount may matter less than a better cutting layout or a simpler detail.

Can all seven decisions be left to the site team?

It is not worth it. Some of them affect the structural design and the panel order. The team needs agreed solutions and the option to report clashes before work begins.

7 branches. Materials closer to your project.

Izoprofil.com map of seven branches offering sandwich panels, PIR boards and sheet metal
  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]

Check prices and availability: +48 500 409 109

Free quote

Materials for your project