Choose a material

Roofing sheets

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

PIR insulation

Kingspan insulation quotations: compare properties as well as the brand

At a glance

When comparing Kingspan insulation quotes, what matters is that the parameters match, not the brand alone. You must establish whether the bidders are pricing the same product variant: the type of core, the facing and the intended place of application. The brand alone does not identify the material, because Therma TR26 and TR27 have a PIR core, while the Kooltherm family is phenolic foam. The price difference must be set against the cost of changes in the other layers of the building element. When the project description gives only Kingspan without the family and variant, it must be completed before comparing quotes for PIR boards, so that every bidder prices the correct product and the same scope of application.

Close-up of a PIR-core board with silver facing when comparing insulation offers

A precise request for quotation

A short sales description is not enough, because the manufacturer’s name covers various materials, including PIR Therma and phenolic Kooltherm. The offer must clearly indicate the material suitable for the designed function and method of execution. Agree with the bidders on the full product name, core type, declaration of properties document and place of application in the building, so that they price a comparable task.

A comparable thermal result

Therma TR26 has a thermal conductivity of 0.022 W/(m·K), while the values for Therma TR27 depend on the thickness. You have to read off the parameter for the precisely selected variant and calculate the equivalent thermal effect. When checking which polyurethane boards are genuinely comparable, include TR26 and TR27 with different thermal conductivities at the same thickness.

Compare the Kingspan variants under comparison at the same required thermal resistance, so that the price difference does not arise from different thermal assumptions. The cheaper item may mean a different effect if a lower lambda is attributed to the whole brand, distorting the parameters of the other families. Before assessing the amount per square metre, check thermal equivalence at the level of the precisely designated offer variants. Add to the offers table the lambda for the selected thickness, the appropriate RD and the consequences of changing the build-up height; only then can the price difference be linked to the parameters.

What increases the scope of works

Changing from TR26 to TR27 also means a change in the surface in contact with the adjacent roof layers. In the first board the facing contains aluminium, in the second glass fibre. When determining quantities and costs, check how this difference affects the intended method of joining the layers.

When replacing the board, check that the new facing is compatible with the fixing and the covering, and base the material allowance on the actual cutting plan. The packaging area alone can be misleading, because the shared PIR core does not allow the product to be substituted without assessing the joints between the layers. Before you determine the number of packages, preserve the function of each joint after the material change proposed during execution. The pricing of polyurethane insulation should cover this detail: the type of surface, the permitted method of joining and the side geometry of both compared boards.

Product parameters and delivery conditions

The reaction to fire of a material and the fire resistance of a building element are different properties. The compressive stress at 10% deformation is also not a ready-made design load value. When a supplier proposes a substitute, analyse the set of data on the material’s reaction to fire, compressive stress and the fire resistance of the entire building element.

Assign every Kingspan parameter to the correct test and scope of application before you treat a lower price as a saving with an equal result. A similar name or facing is not enough, because one favourable property of a board does not prove that all requirements for the building are met. The supplier should present data that allow each parameter to be assigned to the correct test and the actual function of the product. Before accepting a saving, compare the full declaration of the variant and the documentation of the assembly with regard to load-bearing capacity and fire requirements in both solutions.

Completeness of the offered solution

The Therma insulation board is a different product from a complete sandwich panel with structural facings. Assign the load-bearing function, the fixing and the execution of the sealing layers to the actual solution. When asking about the completeness of the offer, point to the change of the insulation product in the cross-section that has separate layers for vapour control and protection against water.

A material change must preserve the continuity of the designed protection against water and vapour flow; do not immediately treat an omitted item in the offer as an unnecessary expense. For the item “polyurethane foam”, ask about the scope of protection, because a similar colour of the board does not confirm the same conditions of connection with the membrane or flashing. Accessory materials are to maintain the correct protective assembly regardless of the chosen family of rigid insulation. Before setting the final price, confirm the description of all layers, the details of the perimeter, the scope of documentation of the proposed substitute and the responsibility for executing the seals.

Calculation of the entire building envelope

A similar name or colour of two Kingspan boards does not settle the equivalence of offers. Enter the full variant and thickness in the comparison, and analyse the proposed substitution through its effects across the entire building element. A general line item of “polyurethane insulation” should cover clearly defined works; a shared PIR designation does not replace such a scope.

Compare offers for different Kingspan boards together with the changes needed in the other layers, so that the purchase cost can be related to the scope of completed works. The difference between quotations may concern scope and a different application rather than a saving with an identical effect. A well-prepared comparison allows the equivalence criteria to be agreed before approving the purchase and changing the construction documentation. When approving the order, check the required thermal resistance, the geometry, the method of fixing and the cost of adapting the adjacent layers, and record each excluded item as a separate cost.

An equivalent Kingspan offer should indicate which properties are retained after the product substitution. This may be the required thermal resistance, but the facing and the application must still be checked. A similar price or a shared part of the name does not conclude this assessment. It is worth recording the cost of adapting the adjacent layers. Only then can the saving on the purchase be related to the full scope of constructing the building element.

7 branches. Materials closer to your project.

Izoprofil.com map of seven branches offering sandwich panels, PIR boards and sheet metal
  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]

Check prices and availability: +48 500 409 109

Free quote

Materials for your project