Choose a material

Roofing sheets

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

PIR insulation

BauderPIR FA: price per square metre and effective coverage

At a glance

The price per metre of BauderPIR FA should refer to a clearly defined area: the external dimension of the board or the effective coverage after the laps are laid. These quantities are not equal, which is why an identical number of sheets does not always cover the area entered in the cost estimate. To compare offers, a row plan with perimeter strips, openings and cut-offs is needed. Also check whether the seller states the number of pieces, the nominal area or the coverage area of the pack. The example below separates the two methods of calculation. We then indicate how to add waste, accessories and labour so that the final cost relates to the entire roof slope and not just the delivery.

Dark-faced board with a pale rebated edge, accompanying the BauderPIR FA guide — Izoprofil.com

The subject of purchase must be unambiguous

The purchase must cover the roof slope allowing for laps and cut-offs, not just the number of boards. Any doubts about the joints are clarified by the survey and roof-slope layout coordinator before the quotes are compared by final amount.

The correct product and the scope of its data

The specification for BauderPIR FA must describe the product that will go on the roof: a PIR core with aluminium facing on both sides, external dimensions 2400 × 1200 mm and coverage dimensions 2385 × 1185 mm, and a rebate forming a 15 mm wide lap. The data for comparison are supplemented by the declared λD 0.022 W/(m·K), the compression level CS(10/Y)120 and fire reaction E. The large format does not make the board a self-supporting structural element. The term polyurethane boards alone is not enough when checking an order — the full name BauderPIR FA is required. In this product, polyurethane foam of the PIR type forms the core, and the properties of the complete board also include the facings; polyurethane insulation here means the installation of factory-made boards in a defined layer arrangement.

A uniform basis for calculation

40 full BauderPIR FA boards have a total nominal area of 115.20 m², but the effective dimensions of 2385 × 1185 mm give approximately 113.05 m² of coverage before cutting. The difference comes from laps, not missing material. Cutting losses from the row layout must be added to the order; the coverage dimension is not a universal percentage allowance for every roof. A coverage schedule and a board row plan allowing for the irregular roof perimeter provide the basis for checking quantities.

Compare BauderPIR FA quotations for the same area of completed insulation. Use the coverage dimensions of 2385 × 1185 mm, which already allow for the lap. If the supplier quotes a price per nominal area, calculate the order cost per area actually covered. List the full boards separately from the cut pieces required by the roof layout.

What changes the cost of the solution

On a rectangular roof, long rows of full boards can be planned. Rooflights, changes in level and irregular edges require more fitting, so the contractor should price these areas separately. The overall dimensions of 2400 × 1200 mm alone are insufficient for ordering: material costs must follow a board layout that allows for the laps. Compare quotations against the same cutting plan and check whether offcuts can be used in other rows.

Labour hidden in the joint

BauderPIR FA has a factory-made rebated lap; the installer fits the boards rather than producing this profile on the roof. In the perimeter strips, the cut pieces and layer terminations must be planned separately. At acceptance, compare the actual coverage and the number of rows laid with the bill of quantities, and separate unused full boards from cutting waste.

Transport, stock and preparation

Schedule BauderPIR FA deliveries to suit the laying sequence and the available protection for the material. Agree pallet storage locations with the person responsible for organising the work; this plan concerns logistics, not coverage area. Determine the board quantity from the measured roof and cutting schedule. Include unloading, handling and any protection needed before the subsequent roof layers are installed.

Conditions for accepting the final quote

A row plan based on the effective board dimension determines the scope of the quotation for BauderPIR FA. At acceptance, it is worth recording the FA designation and confirming the 15 mm wide rebate so that the documents describe the same variant as the delivery. The method of settling changes with the milled edge of a large-format board must be agreed before signing off the scope and its completeness checked. In the case of a proposed substitution, the external and coverage dimensions are compared again before measurement.

7 branches. Materials closer to your project.

Izoprofil.com map of seven branches offering sandwich panels, PIR boards and sheet metal
  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]

Check prices and availability: +48 500 409 109

Free quote

Materials for your project