Choose a material

Roofing sheets

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

PIR insulation

IKO enertherm MG: board prices and the complete membrane roof assembly

At a glance

A flat roof under a synthetic membrane requires a quotation for IKO enertherm MG as a system with that membrane, not for the board alone. A different facing on the board being compared can change the method of fixing, and lambda translates into the required thickness — the cost follows from both conditions. The difficult point is the junction between the membrane and the board surface in the fleece, so it is not enough to price the easy field area. Attach to the enquiry a roof section with the confirmed method of fixing the membrane, together with a measurement of the insulation thickness and the condition of the surface before the covering, so that the supplier does not have to guess the scope.

Light matt board face, accompanying the guide to IKO enertherm MG beneath a membrane — Izoprofil.com

The item being purchased must be unambiguous

Thickness and the compatible method of connection to the membrane are two elements that must be settled before comparing offers. Connections with a specific synthetic membrane should be clarified by the roof designer before the final amount becomes the basis for selection.

The correct product and the scope of its data

When ordering IKO enertherm MG, it is necessary to check not only the PIR core but also the facing on both sides made of perforated, coated glass fleece, because it is this that comes into contact with the membrane. For thicknesses below 120 mm, λD is 0.026 W/(m·K), and from 120 mm it is 0.025 W/(m·K); the RD of a 100 mm board is 3.80 m²K/W, and of a 120 mm board it is 4.80 m²K/W. The declared compressive strength is at least 150 kPa, the reaction to fire is E, and the manufacturer indicates use under synthetic membranes. In the specification, the full name IKO enertherm MG replaces generic polyurethane boards, because the properties of the complete board also include the facings, and not just the core.

A uniform basis for calculation

At 110 m², a 100 mm layer is 11.00 m³, and 120 mm is 13.20 m³; the difference in volume alone does not determine the difference in the price of IKO enertherm MG. The rates for the given thicknesses, the packaging and the cutting are read from the offers, without proportionally multiplying the board price by the height. Lambda 0.026 below 120 mm and 0.025 from 120 mm contribute to the quotation together with the thickness, the format and the method of working the membrane — only this scope describes the same intended execution.

The quotation for IKO enertherm MG requires one unit of comparison: boards with coated glass fleece together with the waterproofing, not the core alone. The declared lambda of 0.026 below 120 mm and 0.025 from 120 mm applies to the product, so the thickness must be selected to match the required thermal resistance. The roof cross-section with a confirmed method of fixing the membrane shows what the assumption relates to. The MG description covering the thickness, the format and the method of working the membrane completes the scope, so that the price corresponds to the variant actually needed on the roof.

What changes the cost of the solution

Selecting the MG thickness for the required thermal resistance and the chosen covering involves a different scope of works from reassessing the entire system after another facing is proposed. When combining the membrane with the surface of the boards in the fleece, the consequences of both decisions must be set out. The MG board must not be assigned the lambda of 0.022 that belongs to another variant, because the prices then relate to different assumptions. Differences in the cross-section are confirmed by the roof designer with the specific synthetic membrane; only then does the choice of the more favourable item have a basis. The scope is organised by the MG description with thickness, format and the method of working the membrane.

Labour hidden in the joint

Before laying the membrane, check the MG designation and the condition of the coated glass fleece. In the offer, separate the surface preparation, fixing and treatment of the perimeter and penetrations from the supply of the insulation itself. The method of connection to the covering must correspond to the documentation of the agreed system, not to the similar appearance of another board.

Transport, allowance and preparation

Add to the cost of the MG the preparation of the substrate and protection against point loading during the works, if the adopted solution requires it. The quantity of material results from the format and the cutting layout on the roof slope. A change of membrane or of the fixing method requires verification of compatibility and of the cost of accessories; not every such change automatically means a different number of boards.

Conditions for accepting the final quote

Base the acceptance on the roof cross-section with the confirmed method of fixing the membrane. Before covering, record the MG designation and the condition of the fleece, and report deviations at the connections for agreement. Compare the cost of the alternative variant only after confirming the compatibility of the covering, the required thickness and all terminations.

7 branches. Materials closer to your project.

Izoprofil.com map of seven branches offering sandwich panels, PIR boards and sheet metal
  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]

Check prices and availability: +48 500 409 109

Free quote

Materials for your project