Choose a material

Roofing sheets

Sandwich panels

PIR insulation boards

XPS

Accessories

Fencing

PIR insulation

BauderPIR FA-TE: cost comparison for terrace insulation

At a glance

A terrace above a room needs insulation that fits within the existing levels at the doors and the drain. With BauderPIR FA-TE, the critical point is therefore the junction at the terrace door threshold and the nearby drain, not the main terrace field itself. When requesting a quote for FA-TE, it is worth including a section drawing at the door with level markings and a measurement from the substrate to the permitted surface level, so that the supplier does not have to guess the scope. Quotes should also use a consistent designation of the variant and edge geometry, otherwise the quantities will be based on different coverage dimensions. The cost of the terrace includes substrate preparation, waterproofing and the surface finish, and the small board format does not mean the details at the threshold will be the cheapest.

Grey grid-faced board, illustration for a terrace assembly with BauderPIR FA-TE — Izoprofil.com

The subject of purchase must be unambiguous

The thermal insulation must fit together with the drainage and the terrace’s finishing layers. The junctions at the doors should be clarified by the terrace designer before quotations are compared by final amount.

The correct product and the scope of its data

The terrace specification for BauderPIR FA-TE must state the full name and the edge variant, because the name “polyurethane boards” alone does not identify the delivery. The product has aluminium facings, λD 0.022 W/(m·K), CS(10/Y)120 and reaction-to-fire class E; external dimension 1200 × 600 mm. The British documentation describes straight edges, the Polish data sheet gives an coverage dimension of 1185 × 585 mm, and the designation FA TE F refers to the rebate. The PIR core and facings together determine the properties of the complete board, which is why these data should not be combined without confirmation of the variant of the specific delivery.

A uniform basis for calculation

The outline of the BauderPIR FA-TE board of 1200 × 600 mm corresponds to 0.72 m², and 25 sheets give 18.00 m² of external area. This is not automatically the coverage of every variant: the Polish data sheet gives a separate coverage dimension, and the UK documentation describes a straight edge. Before converting the order, a document confirming the edge and coverage dimension of the delivery is needed. Losses at the threshold and the drain remain separate; the example checks the units of the quotation, it does not replace the terrace cutting plan.

BauderPIR FA-TE has an external format of 1200 × 600 mm, so the number of boards and waste depends on the actual coverage area, not on the terrace area at the outline. With a height limit below the threshold and the required finish, the surface, insulation and drainage must be brought together in one section. The section at the doors with levels shows what the assumption refers to. The FA-TE description with the specific edge variant completes the scope to which the price refers.

What changes the cost of the solution

Changing the thickness of the thermal layer while maintaining the effect may be limited to a single detail or may require adjusting the other terrace heights. For BauderPIR FA-TE, the decision concerns the threshold of the terrace door and the nearby drain. Data from the simple UK variant should not be combined with the Polish data sheet with the smaller cover width, because they relate to different assumptions. The terrace designer confirms the section and the connections to the doors; only then does the choice of variant have a basis.

Labour hidden in the joint

The edge profile confirmed for the documentation and the delivery determines the scope of labour for BauderPIR FA-TE. The actual material surface in the described variant is the aluminium facing with auxiliary mesh; a different method of preparation or sealing changes the amount of work. The bidder states how it will obtain the document confirming the edge and the coverage dimension of the delivery and who accepts the product. The waterproofing and the terrace surface must not appear as an unplanned surcharge, and the door threshold and drain should be priced separately if they require work different from the main field.

Transport, allowance and preparation

The BauderPIR FA-TE quotation does not end with the price of the boards delivered to the site. It is necessary to state who will distribute the load from the surface and its supports and prepare the base, and to base the order quantity on the FA-TE description with a specific edge variant. Finishing the terrace with waterproofing and surface extends the schedule, so waiting may increase the cost of protection. A change in the height limit below the threshold with the required finish forces a recalculation of the number of elements until the full scope accommodates the thermal insulation with drainage and terrace layers.

Conditions for accepting the final quote

The scope of the offer for BauderPIR FA-TE must correspond to the terrace section at the doors with the marked levels. Acceptance requires a document confirming the edge and the coverage dimension of the delivery, so that it does not describe a different variant from the one delivered. It is worth agreeing the settlement of changes at the terrace door threshold and the nearby drain before signing the scope and checking its completeness. With the proposed change, the height of the surface, insulation and drain must be reassembled on a single section, preserving the aim of thermally insulating the terrace above the room.

7 branches. Materials closer to your project.

Izoprofil.com map of seven branches offering sandwich panels, PIR boards and sheet metal
  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]

Check prices and availability: +48 500 409 109

Free quote

Materials for your project