PIR insulation
Thermano ETICS quotations: what the complete system price should include
The Thermano ETICS quotation should reflect the complete façade. The insulating material is only one of the items. A reliable comparison also covers wall preparation, fixing, the reinforcing layer, render and the detailing of window sills and corners. Thermano ETICS is a composite board made of PIR with an outer layer of EPS 20 mm thick. The PIR part has gas-tight multilayer facings incorporating aluminium. An enquiry about PIR boards should describe the cross-section of the façade board with a PIR core and an outer layer of EPS 20 mm thick. The surface of Thermano ETICS must be recognised as the outer EPS layer belonging to the composite.

What the quotation must identify
Do not choose solely on the basis of a short commercial description, because the visible EPS is part of the composite and not a freely selectable substitute layer. The compared offer should make it possible to preserve the construction of Thermano ETICS from the core to the surface prepared for further works. Agree with the bidders the full product name, the side with the EPS layer and the compatibility of the intended façade finish, so that everyone prices a similar task.
What result is worth paying for
The value of 0.023 W/(m·K) in Thermano ETICS refers to the PIR itself, not to the entire board. The insulating performance of the composite is read from the thermal resistance R specified for the product.
The value of 0.023 W/(m·K) refers to the PIR component, not to the entire Thermano ETICS board. Therefore, compare variants by the thermal resistance R of the composite, in which PIR and EPS conduct heat differently. For a comparison of offers, enter the total thickness and the corresponding R of the finished product — only then does the difference in price relate to the same thermal effect.
Board format versus actual waste
The Thermano ETICS board is available in the format 600 × 1200 mm with BASIC edges, and the offer lists variants with a total thickness from 100 to 180 mm.
The 600 × 1200 mm format and the BASIC edges dictate the cutting layout around openings: determine the course of the joints at corners before laying, and the allowance results from the cutting plan, not from the wall area. Where windows are closely spaced, the number of packs can be misleading, because the surface area alone does not show the waste. Check the layout drawing and the termination of the composite at the window frames so that the reinforcement does not rest on a random arrangement of boards.
Parameters required for application
The declared reaction to fire of Thermano ETICS is E and relates to the product. The assessment of the entire façade also covers the fixing, the reinforced layer and the render.
Thermano ETICS has a declared reaction to fire of E as a product, but the complete façade also includes the fixing, the reinforced layer and the render. When considering a substitute, compare the set of system components and the fixing design, because a similar name or facing will not replace the result for a different ETICS system. The supplier should specify the layer build-up and its documentation before the solution is approved.
Delivery and protection of the purchased material
The 20 mm EPS layer on the outside of Thermano ETICS is merely a substrate for the subsequent elements of the façade system. It does not relieve you of the need to protect against water in the window sill area, at the plinth or at the top of the wall.
Water at the window sill and at the top end of the wall must be drained away from the surface and the interior of the thermal insulation; 20 mm EPS in Thermano ETICS will not replace this. Therefore, within the scope of the finishing works, specify the projection and ends of the window sill, the closing of the sides, the continuity of the sealing at the window and the responsibility for these protections. An omitted item is a separate cost, not a saving.
Acceptance in line with the scope of the order
In the Thermano ETICS order, state the full product name and the total thickness of the composite. The offer being compared should relate to an identical façade finishing system.
For the insulation works, provide the full name and total thickness of Thermano ETICS and the same finishing system, so that the purchase cost refers to completed works. A similar trade description does not guarantee the same product construction, so a difference in quotations may result from the scope. At approval, check the board name and thickness, the finish and the materials at openings, and record excluded items as a separate cost.
For Thermano ETICS, check whether the stated thickness refers to the entire composite. The external 20 mm EPS is part of the product and affects its overall dimension. Two items with a similar name therefore need not represent the same cross-section. For comparison, the correct thermal resistance and a matching scope of façade finishing are needed. Only then can the cost of the boards, fixing, reinforcement and flashings be compared.






