PIR MIX insulation board, 20 mm, second grade

Original price was: 2,32 €.Current price is: 2,28 €. incl. VAT / m²Lowest recorded price since 16.11.2026: 2,28 € incl. VATPrice monitoring: 30 days. No price history from before the reduction is available.

In stock

Mixed stock of PIR insulation boards. Thickness in this offer: 20 mm (2 cm). Second grade.

Batch formats listed: 1200 × 2400 mm or 1200 × 2500 mm. Approximate density: 30 kg/m³. Prices and sales quantities are expressed in m².

The mixed-stock listing gives a thermal conductivity range of 0.022 to 0.027 W/(m·K). For a particular board, check the manufacturer’s marking and declaration of performance.

Boards may be bowed or have locally underfilled cores. Straight-edged boards may also be supplied. Check the photographs and the condition of the available batch before choosing boards.

Brands and thicknesses vary across the MIX range. Ask separately about availability of other thicknesses in the 20–200 mm range.

Names listed in this MIX range include Unilin, termPIR, Thermano, Bauder, Soprema, Recticel, Kingspan and IKO. The brand supplied depends on the batch.

In stock

Description

Free quote — +48 500 409 109

PIR MIX Second-Grade Insulation Board

PIR MIX is a second-grade insulation board available in various brands, formats and batches, which translates into varying surface and edge quality. Possible deviations from flatness and local core voids mean that the actual usable area after trimming may be smaller than the nominal one. Comparing the cost per usable square metre with the price per nominal square metre allows a realistic assessment of the purchase’s value.

From Nominal to Usable Square Metre

When calculating the cost per usable square metre, account must be taken of losses during cutting and any rejects due to surface defects. The unit price refers to the nominal area, so only after converting to the area actually used can different PIR MIX batches be compared economically.

When planning a purchase, it is worth estimating what proportion of the nominal surface area of PIR MIX boards will actually be used in the project, taking into account the need to cut sheets to the dimensions of the partition and any rejects caused by surface or edge defects.

Comparing batches by cost per usable square metre

To compare different PIR MIX batches reliably, the purchase price should be related to the area that remains usable after cutting and rejecting defective pieces, rather than to the nominal area of the sheets.

Only the cost per usable square metre calculated in this way allows an assessment of which PIR MIX batch is more economically advantageous for a given method of processing and project requirements.

The cost per usable square metre also shows whether a lower purchase price is offset by greater cutting losses and rejects caused by surface or edge defects. When comparing batches of PIR MIX, it is therefore worth setting the nominal price against the actual yield that a given batch delivers in a specific project.

SteelProfil range: PIR insulation offers – second and third quality, outlet

What our customers say

Back to top